On Sun, 2009-04-19 at 17:18 -0700, Zach Welch wrote:
> Hi all,
>
> Since my patch to enable -Werror got in a little faster than I expected,
> I decided to try and save myself some pain by installing and testing the
> libftdi and libftd2xx libraries and tested the associated OpenOCD driver
> builds against each set of configuration options.
>
> The attached patch fixes the warnings that appear when --enable-ft2232-*
> or --enable-presto-* are used.
Nuts. As soon as this hit the list, I noticed that I should have used
'%u' and not '%d' in the format specifiers. Please use this version.
Sorry,
Zach
Index: src/jtag/bitq.c
===================================================================
--- src/jtag/bitq.c (revision 1475)
+++ src/jtag/bitq.c (working copy)
@@ -39,7 +39,7 @@
bitq_state_t bitq_in_state; /* state of input queue */
u8* bitq_in_buffer; /* buffer dynamically reallocated as needed */
-unsigned long bitq_in_bufsize = 32; /* min. buffer size */
+int bitq_in_bufsize = 32; /* min. buffer size */
/*
* input queue processing does not use jtag_read_buffer() to avoid unnecessary overhead
Index: src/jtag/presto.c
===================================================================
--- src/jtag/presto.c (revision 1475)
+++ src/jtag/presto.c (working copy)
@@ -138,7 +138,7 @@
0x80, 0xA0, 0xA8, 0xB0, 0xC0, 0xE0
};
-int presto_write(u8 *buf, int size)
+int presto_write(u8 *buf, u32 size)
{
#if BUILD_PRESTO_FTD2XX == 1
DWORD ftbytes;
@@ -160,14 +160,14 @@
if (ftbytes != size)
{
- LOG_ERROR("couldn't write the requested number of bytes to PRESTO (%i < %i)", ftbytes, size);
+ LOG_ERROR("couldn't write the requested number of bytes to PRESTO (%lu < %u)", ftbytes, size);
return ERROR_JTAG_DEVICE_ERROR;
}
return ERROR_OK;
}
-int presto_read(u8* buf, int size)
+int presto_read(u8* buf, u32 size)
{
#if BUILD_PRESTO_FTD2XX == 1
DWORD ftbytes;
@@ -202,7 +202,7 @@
if (ftbytes != size)
{
/* this is just a warning, there might have been timeout when detecting PRESTO, which is not fatal */
- LOG_WARNING("couldn't read the requested number of bytes from PRESTO (%i < %i)", ftbytes, size);
+ LOG_WARNING("couldn't read the requested number of bytes from PRESTO (%lu < %u)", ftbytes, size);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -212,7 +212,7 @@
#if BUILD_PRESTO_FTD2XX == 1
int presto_open_ftd2xx(char *req_serial)
{
- int i;
+ u32 i;
DWORD numdevs;
DWORD vidpid;
char devname[FT_DEVICE_NAME_LEN];
@@ -238,7 +238,7 @@
return ERROR_JTAG_DEVICE_ERROR;
}
- LOG_DEBUG("FTDI devices available: %i", numdevs);
+ LOG_DEBUG("FTDI devices available: %lu", numdevs);
for (i = 0; i < numdevs; i++)
{
if ((presto->status = FT_Open(i, &(presto->handle))) != FT_OK)
@@ -257,7 +257,7 @@
break;
}
else
- LOG_DEBUG("FT_GetDeviceInfo failed: %i", presto->status);
+ LOG_DEBUG("FT_GetDeviceInfo failed: %lu", presto->status);
LOG_DEBUG("FTDI device %i does not match, closing", i);
FT_Close(presto->handle);
Index: src/jtag/ft2232.c
===================================================================
--- src/jtag/ft2232.c (revision 1475)
+++ src/jtag/ft2232.c (working copy)
@@ -158,7 +158,7 @@
{ "stm32stick", stm32stick_init, stm32stick_reset, NULL },
{ "axm0432_jtag", axm0432_jtag_init, axm0432_jtag_reset, NULL },
{"sheevaplug", sheevaplug_init, sheevaplug_reset, NULL },
- { NULL, NULL, NULL },
+ { NULL, NULL, NULL, NULL },
};
static u8 nTRST, nTRSTnOE, nSRST, nSRSTnOE;
@@ -233,7 +233,7 @@
}
-int ft2232_read(u8* buf, int size, u32* bytes_read)
+int ft2232_read(u8* buf, u32 size, u32* bytes_read)
{
#if BUILD_FT2232_FTD2XX == 1
DWORD dw_bytes_read;
@@ -1607,7 +1607,7 @@
if (status == FT_OK)
{
char** desc_array = malloc( sizeof(char*) * (num_devices + 1) );
- int i;
+ u32 i;
for (i = 0; i < num_devices; i++)
desc_array[i] = malloc(64);
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
