It's clean now: 4500 kHz Info : Versaloon(0x03)by Simon(compiled on Apr 25 2009) Info : buffer size for USB is 12288 bytes Info : VSLLink_20080905 by Simon(compiled on Apr 25 2009) Info : vsllink run in NORMAL mode Info : VSLLink JTAG Interface ready Info : JTAG tap: avr.cpu tap/device found: 0x8970203f (Manufacturer: 0x01f, Part: 0x9702, Version: 0x8) Info : JTAG Tap/device matched 4500 kHz Info : JTAG tap: avr.cpu tap/device found: 0x8970203f (Manufacturer: 0x01f, Part: 0x9702, Version: 0x8) Info : JTAG Tap/device matched verify Capture-IR is disabled target state: halted Info : device id = 0x8970203f Info : target device is atmega128 avr mass erase complete Info : Padding image section 0 with 56 bytes Info : Padding image section 1 with 8 bytes Info : Padding image section 2 with 4 bytes Info : Padding image section 3 with 36 bytes Info : Padding image section 4 with 4 bytes Info : Padding image section 5 with 8 bytes wrote 32252 byte from file E:/Versaloon/Software/CAMERAPROTOCOLAGENT.hex in 2.031250s (15.505769 kb/s) Info : JTAG tap: avr.cpu tap/device found: 0x8970203f (Manufacturer: 0x01f, Part: 0x9702, Version: 0x8) Info : JTAG Tap/device matched
2009-04-27 Best Regards, Simon Qian SimonQian([email protected]) ---- www.SimonQian.com 发件人： �yvind_Harboe 发送时间： 2009-04-27 15:37:31 收件人： SimonQian 抄送： Openocd-Dev 主题： Re: Re: Re: [Openocd-development] AVR support -- new tap problem Better? -- �yvind Harboe Embedded software and hardware consulting services http://consulting.zylin.com
_______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
