Hi all, I am sending this email just to give a feedback about jlink interface status.
I noticed that using J-Link yellow version 6.0 OpenOCD can detects my ARM9 i.MX27 processor with no problem. But using J-Link yellow version 5.4 nothing works: # openocd -f interface/jlink.cfg -f target/imx27.cfg Open On-Chip Debugger 1.0 (2009-04-27-12:27) svn:1545 BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS $URL: http://svn.berlios.de/svnroot/repos/openocd/trunk/src/openocd.c $ dcc downloads are enabled Info : J-Link compiled Dec 03 2007 17:15:31 ARM Rev.5 Info : Vref = 3.112 TCK = 1 TDI = 1 TDO = 1 TMS = 0 SRST = 1 TRST = 1 Info : J-Link JTAG Interface ready Error: jlink_usb_message failed with result=1) Error: jlink_tap_execute, wrong result -107 (expected 1) Error: jlink_usb_message failed with result=1) Error: jlink_tap_execute, wrong result -107 (expected 1) Error: jlink_usb_message failed with result=1) Error: jlink_tap_execute, wrong result -107 (expected 2) Error: jlink_usb_message failed with result=1) Error: jlink_tap_execute, wrong result -107 (expected 2) Error: jlink_usb_message failed with result=1) Error: jlink_tap_execute, wrong result -107 (expected 3) Error: jlink_usb_message failed with result=1) Error: jlink_tap_execute, wrong result -107 (expected 5) Warn : no telnet port specified, using default port 4444 Warn : no gdb port specified, using default port 3333 Warn : no tcl port specified, using default port 6666 Can you please to comment about your J-Link status? What other versions (beside 6.0) work? Best Regards, Alan _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
