Hello List, I had problems with the last openocd version, therefore I decide to go back and check some older versions. The problems with the new version was:
- could connect to str710, but if I change data with mww only the first time I could display the data with mdw. The second time I got only 0x00000000 or 0xffffffff - could connect to LPC2148, but the CPU could not halted. But with the old version r1405 and a patch from Jeff Williams: https://lists.berlios.de/pipermail/openocd-development/2009-March/004947.htm l It was working with the STR710 now. Now I can use openocd on the Mac to debug with Eclipse and a J-Link. And openocd could connect to the LPC2148 and halt the target after a reset init, or reset halt. But debug with Eclipse was not tested yet. In the moment I have no idea why 1405+patch is working and why newer version of openocd not. Please can someone with a J-Link can check it too? Best regards, Michael _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
