On Sat, 9 May 2009, Øyvind Harboe wrote:
Please report any problems you are experiencing with svn head.
Except for the performance regressions, which will be addressed
next week, there are no reported problems at this point w.r.t.
the JTAG API changes.
Every *other* time I run, I get this...
--------------------------8<-----------------------------
Open On-Chip Debugger 0.2.0-in-development (2009-05-16-19:44) svn:1799M
BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
$URL: http://svn.berlios.de/svnroot/repos/openocd/trunk/src/openocd.c $
jtag_speed: 16
Error: J-Link command EMU_CMD_VERSION failed (-110)
Segmentation fault
--------------------------8<-----------------------------
alternating with this:
--------------------------8<-----------------------------
Open On-Chip Debugger 0.2.0-in-development (2009-05-16-19:44) svn:1799M
BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
$URL: http://svn.berlios.de/svnroot/repos/openocd/trunk/src/openocd.c $
jtag_speed: 16
Error: J-Link command EMU_CMD_VERSION failed (-110)
Info : J-Link ARM V6 compiled Mar 3 2008 18:04:42
Info : JLink caps 0x1f7fbf
Info : JLink max mem block 9992
Info : Vref = 3.280 TCK = 1 TDI = 0 TDO = 1 TMS = 0 SRST = 1 TRST = 1
Info : J-Link JTAG Interface ready
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent!
(3195). Workaround: increase "set remotetimeout" in GDB
Info : JTAG tap: ixp42x.cpu tap/device found: 0x19277013 (Manufacturer: 0x009,
Part: 0x9277, Version: 0x1)
Info : JTAG Tap/device matched
Warn : no tcl port specified, using default port 6666
Info : JTAG tap: ixp42x.cpu tap/device found: 0x19277013 (Manufacturer: 0x009,
Part: 0x9277, Version: 0x1)
Info : JTAG Tap/device matched
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent!
(1954). Workaround: increase "set remotetimeout" in GDB
Error: invalid mode value encountered
Error: cpsr contains invalid mode value - communication failure
Error: timed out while waiting for target halted
Runtime error, file "embedded:startup.tcl", line 211:
expected return code but got 'TARGET: ixp42x.cpu - Not halted'
Runtime error, file "../../../openocd-usr8200-jlink.cfg", line 49:
--------------------------8<-----------------------------
This setup has worked (at least more than it does at present - I could
read registers, etc), but I don't have the information as to which SVN
version did work, sorry.
My only mod is to another adapter, so don't worry about the 'M'!!
I will continue debugging, and will provide more information later...
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
