Øyvind Harboe wrote:
> You have to create the target before the init command.
>
> One could talk about allowing targets to be created/deleted
> on the fly, but OpenOCD isn't at that stage today.
>
>
> This works:
>
> openocd -s lib/openocd/ -f interface/dummy.cfg -f target/omap3530.cfg
> -c "target create omap3.cpu cortex_m3 -endian little -chain-position
> omap3.cpu" -c init -c "ocd_mem2array dataval 32 [expr \"0x54011000 +
> 0 * 4\"] 1"
>
> Move init and it fails:
>
> openocd -s lib/openocd/ -f interface/dummy.cfg -f target/omap3530.cfg
> -c init -c "target create omap3.cpu cortex_m3 -endian little
> -chain-position omap3.cpu" -c "ocd_mem2array dataval 32 [expr
> \"0x54011000 + 0 * 4\"] 1"
Hmm, ok, on the command line this seems to be the difference.
Any idea what might be different doing it at (telnet) command prompt:
-- cut --
openocd -s lib/openocd/ -f interface/dummy.cfg -f target/omap3530.cfg
Open On-Chip Debugger
> targets
CmdName Type Endian AbsChainPos Name State
-- ---------- ---------- ---------- ----------- ------------- ----------
> init
> target create omap3.cpu cortex_m3 -endian little -chain-position
omap3.cpu
> targets
CmdName Type Endian AbsChainPos Name State
-- ---------- ---------- ---------- ----------- ------------- ----------
0: omap3.cpu cortex_m3 little 0 omap3.cpu unknown
> ocd_mem2array dataval 32 [expr \"0x54011000 + 0 * 4\"] 1
invalid command name "ocd_mem2array_dataval"
called at file "command.c", line 453
called at file "embedded:startup.tcl", line 89
called at file "embedded:startup.tcl", line 93
>
-- cut --
vs.
-- cut --
openocd -s lib/openocd/ -f interface/dummy.cfg -f target/omap3530.cfg
Open On-Chip Debugger
> targets
CmdName Type Endian AbsChainPos Name State
-- ---------- ---------- ---------- ----------- ------------- ----------
> target create omap3.cpu cortex_m3 -endian little -chain-position
omap3.cpu
> targets
CmdName Type Endian AbsChainPos Name State
-- ---------- ---------- ---------- ----------- ------------- ----------
0: omap3.cpu cortex_m3 little 0 omap3.cpu unknown
> init
> ocd_mem2array dataval 32 [expr \"0x54011000 + 0 * 4\"] 1
invalid command name "ocd_mem2array_dataval"
called at file "command.c", line 453
called at file "embedded:startup.tcl", line 89
called at file "embedded:startup.tcl", line 93
>
-- cut --
? Independent of init and target create order, both give the same
result: Failing ocd_mem2array.
Best regards
Dirk
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
