Øyvind Harboe wrote: > On Wed, Jun 10, 2009 at 5:30 PM, Dirk Behme<[email protected]> wrote: >> Ųyvind Harboe wrote: >>> Committed. >>> >>> Does OMAP/BeagleBoard need this? >>> >>> This "pathmove" command is ready for testing & feedback. >> If someone with more OpenOCD and recent changes knowledge than me likes to >> convert >> >> http://svn.berlios.de/svnroot/repos/openocd/trunk/tcl/board/ti_beagleboard.cfg > > I have no idea what the expected behaviour of "endstate" was in this > case. There is no comment in the file and no other clues.
As I tried to explain already in [1], it's my understanding that endstate is used there to get what's documented in http://elinux.org/OMAP3530_ICEPICK#Adding_TAPs_to_the_Scan_Chain and is called there "The route to JTAG shift state is 'shortest transition". I.e. while we had this "do always 7 jtag TAP steps" logic, it was used to not end in 'run test idle'. Instead end in the state given by endstate to get this 'shortest transition'. Best regards Dirk [1] https://lists.berlios.de/pipermail/openocd-development/2009-June/007807.html _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
