http://svn.berlios.de/svnroot/repos/openocd/trunk/tcl/target/aduc702x.cfg
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME s3c2410
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
# This config file was defaulting to big endian..
set _ENDIAN little
}
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0xffffffff
}
The _CHIPNAME and _CPUTAPID do not look right at all.
Does OpenOCD support AduC70xx right now?
I just got a demo board from ADI (ADuC7060 with mIDAS-Link).
The following is the output from Segger J-Link Commander V4.06b.
SEGGER J-Link Commander V4.06b ('?' for help)
Compiled Jun 12 2009 13:25:59
Updating firmware: J-Link ARM V7 compiled May 27 2009 17:29:25
Replacing firmware: J-Link ARM V7 compiled May 20 2008 19:32:57
... Firmware update successful. CRC=347C
Waiting for new firmware to boot
New firmware booted successfully
DLL version V4.06b, compiled Jun 12 2009 13:25:42
Firmware: J-Link ARM V7 compiled May 27 2009 17:29:25
Hardware: V7.00
S/N : 77000044
OEM : MIDAS
Feature(s) : RDI
VTarget = 3.274V
Info: TotalIRLen = 4, IRPrint = 0x01
Found 1 JTAG device, Total IRLen = 4:
Id of device #0: 0x3F0F0F0F
Found ARM with core Id 0x3F0F0F0F (ARM7)
JTAG speed: 5 kHz
J-Link>st
VTarget=3.274V
ITarget=0mA
TCK=1 TDI=0 TDO=1 TMS=0 TRES=1 TRST=1
Supported JTAG speeds:
- 48 MHz/n, (n>=4). => 12000kHz, 9600kHz, 8000kHz, ...
- Adaptive clocking
J-Link>hwinfo
HWInfo[00] = Target power is disabled
HWInfo[02] = 0mA (ITarget)
HWInfo[03] = 0mA (ITargetPeak)
HWInfo[04] = 0mA (ITargetPeakOperation)
HWInfo[10] = 0ms (ITargetMaxTime0)
HWInfo[11] = 0ms (ITargetMaxTime1)
HWInfo[12] = 0ms (ITargetMaxTime2)
J-Link>is
JTAG scan length: 4
J-Link>ms
Syntax: ms <scan chain>
J-Link>mr
Min: 0ns, Max: 0ns, Average: 0ns
J-Link>ms 0
Length of scan chain [0] = 105
J-Link>ms 1
Length of scan chain [1] = 33
J-Link>ms 2
Length of scan chain [2] = 38
J-Link>ms 3
Length of scan chain [3] = 0
J-Link>ms 4
Length of scan chain [4] = 157
--
Xiaofan http://mcuee.blogspot.com
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
