Committed to TODO: - i.MX27 reset run problems. Notice below that even if the target is running, a EICE_DBG_STATUS_DBGACK(I think...) is detected and OpenOCD wrongly believes that the target is halted. Polling the target afterwards reveals that the target is running.
> reset run JTAG tap: imx27.bs tap/device found: 0x1b900f0f (mfg: 0x787, part: 0xb900, ver: 0x1) JTAG Tap/device matched JTAG tap: imx27.cpu tap/device found: 0x07926121 (mfg: 0x090, part: 0x7926, ver: 0x0) JTAG Tap/device matched WARNING: unknown debug reason: 0xe target state: halted target halted in ARM state due to debug-request, current mode: User cpsr: 0x00000000 pc: 0xffffffe8 MMU: disabled, D-Cache: disabled, I-Cache: disabled -- Øyvind Harboe Embedded software and hardware consulting services http://www.zylin.com _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
