Comments?
Flash programming on adu7024 w/working area does
not work out of the box with the shipping aduc702x.cfg config script.
I strongly suspect that a reset-init script is needed.... Patches anyone?
Using parport flash programming w/working area does not crash as
Thomas reported, it just doesn't work.
Attached is a patch that cleans up the error handling at least. This only
affects the reportedly broken codepath when programming flash
is trying to use working memory.
> flash write_image /home/oyvind/workspace/aduflash.bin 0x80000 bin
aduc702x detected error writing flash
error writing to flash at address 0x00080000 at offset 0x00000000 (-4)
> flash write_image /home/oyvind/workspace/aduflash.bin 0x80000 bin
aduc702x detected error writing flash
error writing to flash at address 0x00080000 at offset 0x00000000 (-4)
--
Øyvind Harboe
Embedded software and hardware consulting services
http://www.zylin.com
### Eclipse Workspace Patch 1.0
#P openocd
Index: src/flash/aduc702x.c
===================================================================
--- src/flash/aduc702x.c (revision 2490)
+++ src/flash/aduc702x.c (working copy)
@@ -193,6 +193,11 @@
return ERROR_FLASH_OPERATION_FAILED;
}
+/* If this fn returns ERROR_TARGET_RESOURCE_NOT_AVAILABLE, then the caller can
fall
+ * back to another mechanism that does not require onboard RAM
+ *
+ * Caller should not check for other return values specifically
+ */
static int aduc702x_write_block(struct flash_bank_s *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
aduc702x_flash_bank_t *aduc702x_info = bank->driver_priv;
@@ -249,8 +254,11 @@
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
- target_write_buffer(target, aduc702x_info->write_algorithm->address,
- sizeof(aduc702x_flash_write_code),
(uint8_t*)aduc702x_flash_write_code);
+ if ((retval=target_write_buffer(target,
aduc702x_info->write_algorithm->address,
+ sizeof(aduc702x_flash_write_code),
(uint8_t*)aduc702x_flash_write_code))!=ERROR_OK)
+ {
+ return retval;
+ }
/* memory buffer */
while (target_alloc_working_area(target, buffer_size, &source) !=
ERROR_OK)
@@ -281,7 +289,10 @@
{
uint32_t thisrun_count = (count > (buffer_size / 2)) ?
(buffer_size / 2) : count;
- target_write_buffer(target, source->address, thisrun_count * 2,
buffer);
+ if ((retval=target_write_buffer(target, source->address,
thisrun_count * 2, buffer))!=ERROR_OK)
+ {
+ break;
+ }
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, thisrun_count);
@@ -294,12 +305,14 @@
10000, &armv4_5_info)) != ERROR_OK)
{
LOG_ERROR("error executing aduc702x flash write
algorithm");
- retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
- if ((buf_get_u32(reg_params[3].value, 0, 32) & 1) != 1) {
- retval = ERROR_FLASH_OPERATION_FAILED;
+ if ((buf_get_u32(reg_params[3].value, 0, 32) & 1) != 1)
+ {
+ /* FIX!!!! what does this mean??? replace w/sensible
error message */
+ LOG_ERROR("aduc702x detected error writing flash");
+ retval = ERROR_FAIL;
break;
}
@@ -382,14 +395,9 @@
return ERROR_FLASH_OPERATION_FAILED;
}
}
- else if (retval == ERROR_FLASH_OPERATION_FAILED)
- {
- LOG_ERROR("flash block writing failed");
- return ERROR_FLASH_OPERATION_FAILED;
- }
}
- return ERROR_OK;
+ return retval;
}
static int aduc702x_probe(struct flash_bank_s *bank)
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
