Hi,
my last email (Re: not quite up and running... :-( didn't get much of
a response.
Was it unclear, boring, not relevant to the list or unfriendly?
Or did it just get overlooked? :-)
Anyway, I posted that I wasn't getting very far with the following
setup:
>
> libusb-0.1.10a
> libftdi-0.16
> openocd-0.2.0.
>
> MacBook Pro (Intel Core 2 Duo)
> Mac OS X 10.6.1 (Snow Leopard).
>
> Hitex STR9 comstick, STR912CS-A2
> ...
> Error: The specified JTAG interface was not found (ft2232)
> The following JTAG interfaces are available:
> ...
I got sidetracked by a BUG in libftdi-0.16/examples/find_all
which results in:
> Number of FTDI devices found: 0
That's because it has a **BUG**, namely,
if ((ret = ftdi_usb_find_all(&ftdic, &devlist, 0x0403, 0x6001)) <
0)
instead of the correct:
if ((ret = ftdi_usb_find_all(&ftdic, &devlist, 0x0403, 0x6010)) <
0)
Still, that doesn't mean that openocd recognises my Comstick :-(
Anyway, I thought I'd try the openOCD-USB dongle and Hitex STR912 Eval
board.
Is there a suitable board config file? I didn't see one specifically
for that board. Only for the
hitex_str9-comstick.cfg
and
str910-eval.cfg (but that's from STM).
Could someone send me their openocd.cfg file for
EITHER
a Hitex STR9 comstick, STR912CS-A2
OR
a Hitex STR912 evaluation board.
Or both, of course :-)
Please?
--colin
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
