On Thursday 12 November 2009, Jonas Horberg wrote: > The attached patch is updated against main line because > of the removal of the jtag_speed command.
Committed; thanks. I tweaked the documentation a bit, and included some whitespace fixes too. - Dave > The default setting should actually be set to the lowest > known toggling time of common hardware. This to guarantee > that the JTAG frequency never is higher than the commanded. > However I can not find data about this and just selected > 1000 ns. It can be changed later when someone with knowledge > of this give input. > > I do not expect that many parport interface users will > measure their parallel port toggling time. The default > setting will be used. This result in that the full > capacity of the interface is not used when a speed below > 500 kHz is commanded. _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
