Hello, I compiled the OpenOCD 0.4.0-dev-snapshot (2009-11-12-12:36) at cygwin platform.
When starting openocd I receive a unexpected tap id - following the corresponding messages: Info : 74 578 core.c:948 jtag_examine_chain_display(): JTAG tap: netx500.cpu tap/device found: 0x07926021 (mfg: 0x010, part: 0x7926, ver: 0x0) Warn : 75 578 core.c:948 jtag_examine_chain_display(): JTAG tap: netx500.cpu UNEXPECTED: 0x07926021 (mfg: 0x010, part: 0x7926, ver: 0x0) Error: 76 578 core.c:948 jtag_examine_chain_display(): JTAG tap: netx500.cpu expected 1 of 1: 0xffffffff (mfg: 0x7ff, part: 0xffff, ver: 0xf) I read NEWTAPS - therefore following information A) JTAG TAP ID code: 0x07926021 B) Maker of the part: Hilscher (www.hilscher.com) C) Familiy: netX D) Actual part number: netX 500 E) Type of board: Evaluation board from Hilscher F) Maker of the board: Hilscher (www.hilscher.com) G) Board Identification: NXSB 100 H) no other JTAG chips on the board Best regards Martin _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
