No, i tried alot of clock combinations from 1kHz to 1MHz, the clock is not the issue, i think. The electrical signals a very good (measured witz oscilloscop). I also tried to clock the target with 5MHz (with the PEEDI) and it works well.
christian -------- Original-Nachricht -------- > Datum: Thu, 19 Nov 2009 14:38:36 -0700 > Von: David Brownell <[email protected]> > An: [email protected] > CC: "Christian Dumhart" <[email protected]> > Betreff: Re: [Openocd-development] OOCD V0.x.y doesn\'t work with STM32 low > density devices? > On Thursday 19 November 2009, Christian Dumhart wrote: > > I've tried alot to bring up my board with the OOCD and Olimex JTAG, > > but it doesn't work. Can somebody explane the problem and help me to > solve it? > > My first reaction was that this looks like your JTAG clock > is too fast ... since a number of the bit patterns show your > values are shifted by a bit or two from what they should be. > > Once you get the clocking right, it'll work better. > > How fast are you clocking the STM32? > > > > -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 -- Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - sicherer, schneller und einfacher! http://portal.gmx.net/de/go/atbrowser _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
