Laurentiu Cocanu wrote: > I tested version v0.4.0-rc1-98-g6c75f52 of OpenOCD for STR912 target. > > I tried to erase all the contents of the flash, sectors 0 to 7. Commands: > > reset init > flash erase_address 0 0x80000 (or flash erase_sector 0 0 7) > > The expected result is: > > erased sectors 0 through 7 on flash bank 0 in x.xx0000s > > but instead the command returned erase timed out: > > erase timed out > failed erasing sectors 0 to 7 (-4) >
Probably worth changing, this is how i originally wrote the driver anyway :) it may even be a arm966e_write_cp15 bug. The str9 has a bug that effects the fmi status reg if the TCM bit is not set. This would normally be done by str9x flash_config, may need checking it still works. http://www.st.com/stonline/products/literature/es/12944.pdf Cheers Spen _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
