> Do you have anything better with JTAG OCD documentation for AVR8? I have read some, but I can not open it.
> Yes, but if somebody reworked AVR support in openOCD in a sane way, it would be a matter of adding another config file, fairly trivial. In VSprog, avr8.xml is the only thing needed to be changed to support new deivces. This is not hard to implement. > Does it work over JTAG? Which JTAG adapters does it support? It uses Versaloon as programmer, supporting both ISP and JTAG. So it's not a generic programmer for other adapters. > Come on, it's not true. The most unfun thing is to accidentally switch it to use external _generator_ but well, it's not that hard to use something to provide clock even if that was the case. It's easy to provide an external clock, but it doesn't mean that it's easy to calculate fuse values with NO mistake. > avrdude has no GUI for the fuses and i never thought that's a problem. Was it some kind of weird advertisement for your program? ;) Yes if you think. And GUI is no evil. 2010/1/16 Paul Fertser <[email protected]> > Hi, > > On Sat, Jan 16, 2010 at 12:13:33PM +0300, Paul Fertser wrote: > > On Sat, Jan 16, 2010 at 04:44:37PM +0800, simon qian wrote: > > > For AVR8 support, there are other problems: > > > 1. chips library > > > Different AVR chips have different parameters, including Flash Page > Size, > > > EEPROM Page Size, Fuse Size and bit map, Lock bit map, Calibration > Bytes > > > Size. > > > > Yes, but if somebody reworked AVR support in openOCD in a sane way, it > > would be a matter of adding another config file, fairly trivial. > > This remark is not supposed to be rude or offensive. Simon, it's good > OpenOCD has at least some kind of AVR support and it's a good start to > move forward, thanks for that! > > -- > Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! > mailto:[email protected] > -- Best Regards, SimonQian http://www.SimonQian.com
_______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
