>From 557efaa816fdd2148833359dc379c1b79488cc48 Mon Sep 17 00:00:00 2001
From: Spencer Oliver <[email protected]>
Date: Thu, 25 Feb 2010 23:38:32 +0000
Subject: [PATCH 5/7] docs: rename arm7_9 semihosting to arm semihosting

Signed-off-by: Spencer Oliver <[email protected]>
---
 doc/openocd.texi |   24 ++++++++++++------------
 1 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 61e39b2..9951ec7 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -6004,6 +6004,18 @@ Display a table of all banked core registers, fetching 
the current value from ev
 core mode if necessary.
 @end deffn
 
+...@deffn Command {arm semihosting} [...@option{enable}|@option{disable}]
+...@cindex ARM semihosting
+Display status of semihosting, after optionally changing that status.
+
+Semihosting allows for code executing on an ARM target to use the
+I/O facilities on the host computer i.e. the system where OpenOCD
+is running. The target application must be linked against a library
+implementing the ARM semihosting convention that forwards operation
+requests by using a special SVC instruction that is trapped at the
+Supervisor Call vector by OpenOCD.
+...@end deffn
+
 @section ARMv4 and ARMv5 Architecture
 @cindex ARMv4
 @cindex ARMv5
@@ -6056,18 +6068,6 @@ cables (FT2232), but might be unsafe if used with 
targets running at very low
 speeds, like the 32kHz startup clock of an AT91RM9200.
 @end deffn
 
-...@deffn Command {arm7_9 semihosting} [...@option{enable}|@option{disable}]
-...@cindex ARM semihosting
-Display status of semihosting, after optionally changing that status.
-
-Semihosting allows for code executing on an ARM target to use the
-I/O facilities on the host computer i.e. the system where OpenOCD
-is running. The target application must be linked against a library
-implementing the ARM semihosting convention that forwards operation
-requests by using a special SVC instruction that is trapped at the
-Supervisor Call vector by OpenOCD.
-...@end deffn
-
 @subsection ARM720T specific commands
 @cindex ARM720T
 
-- 
1.6.5.1.1367.gcd48

_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development

Reply via email to