David Brownell schrieb:
OK, I just merged this. It should work with any JTAG (or
JTAG/SWD) Adapter which implements the jtag_add_tms_seq()
infrastructure ... for the moment, that's only FT2232 ...
so all the Stellaris eval boards are covered, and others
can start implementing that too.
Great Job David, It works !!
I wrote a self locking Firmware, and the used stellaris recover 0 to unlock it
again !
It works safe, I tested several times, no problem so far.
one minor issue:
openocd produces a segfault during the user power cycle sequence, at the moment power is restored to
target again.
This is reproducible, even with a not locked device, always when I will switch target-power off and
restore it again a segfault is the result.
regards
Arne
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
