On Mon, 2010-03-08 at 10:51 +0000, [email protected] wrote: > Quoting CeDeROM <[email protected]>: > > > Hello! > > > > If anyone is interested to work on the SWJ/RLink with STM32Primer2, > > here goes the pinouts: > > http://www.tomek.cedro.info/content/view/236/1/lang,en/ > > > > Best regards, > > Tomek > > > > I'm interested. I started a while ago tackling this. I developed the > firmware for the ST7 DTC to do the SWD. Where I got a bit stuck was > with changes required to OpenOCD. The problem has now been partly > resolved as I see that changes are being made to the GIT repository to > support SWD. Should be easier now just to add another interface and > will pick this up again soon. > > BTW, the link you gave is broken. > > Regards > Andrew > _______________________________________________ > Openocd-development mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/openocd-development
Looking at the GIT repository I see that there is no support for SWD apart from switch between JTAG & SWD to perform some kind of reset. Simon Qian has an SWD patch for the versaloon adapter. http://www.simonqian.com/en/Versaloon/versaloon_how_to.html We will either need to incorporate this patch or write it again before we can have SWD in the main GIT repository. I can build on Simon's patch but unless it is incorporated into the main branch it will become increasingly stale. I will need the help of the developers in order to bring OpenOCD to the Primer2 in a way that will be maintainable. Regards Andrew _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
