Hi!
I'm using LPC-2478STK Development board with KT-LINK programmer. I finally managed to get OpenOCD 0.4.0 working with KT-LINK. I started debugging and it works fine. But I have an error and I can't find out if it serious or not. I run OpenOCD in following way: openocd-ftd2xx -f interface/kt-link.cfg -f target/lpc2478.cfg Here is log from console: Open On-Chip Debugger 0.4.0 (2010-07-09-11:10) Licensed under GNU GPL v2 For bug reports, read http://openocd.berlios.de/doc/doxygen/bugs.html jtag_nsrst_delay: 100 jtag_ntrst_delay: 100 trst_and_srst srst_pulls_trst srst_gates_jtag trst_push_pull srst_open_drain 500 kHz Info : device: 6 "2232H" Info : deviceID: 67353570 Info : SerialNumber: FFSK6HASA Info : Description: KT-LINK A Info : max TCK change to: 30000 kHz Info : clock speed 500 kHz Info : JTAG tap: lpc2478.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4) Info : Embedded ICE version 7 Error: EmbeddedICE v7 handling might be broken Info : lpc2478.cpu: hardware has 2 breakpoint/watchpoint units And the thing is that I don't know what to do with "Info : Embedded ICE version 7. Error: EmbeddedICE v7 handling might be broken". Is it serious problem? Regards, Krzysiek
_______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
