Hi everyone,
Ah, I should have added that voltage was the very first thing I
checked. On the S5PC100 the JTAG runs at VDD_EXT which has a valid
operating range from below 1.8V to above 3.3V, and the board I'm
trying to bring up has VDD_EXT set to 3.3V (as designed, measured to
~3.25V), so this really shouldn't be the issue here.
Cheers, ....Nick Pelling....
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
