FYI. I am able to make the latest Rev B. BeagleBoard-xM operate after making this trivial modification. I'll send a patch when I know more about whether ICEpick has revved and what exactly was changed.
Jon.
--- Begin Message ---Hi Gerald, I am trying to update the OpenOCD files for the latest Rev. B of the BeagleBoard-xM. Currently, scripts/target/amdm37c.cfg has a TAPID for the JRC (ICEpick) of 0x0b89102f, which apparently belongs to the "rev C" ICEpick. However, the latest board contains an ICEpick with a version 1, thus an ID of 0x1b89102f (note the 1). A temporary fix is to edit this file to add a secondary TAPID: dm37x { # Primary TAP: ICEpick-C (JTAG route controller) and boundary scan set _JRC_TAPID 0x0b89102f set _JRC_TAPID1 0x1b89102f } And then also add this new TAPID to the jtag configuration: # Primary TAP: ICEpick - it is closest to TDI so last in the chain jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ -expected-id $_JRC_TAPID -expected-id $_JRC_TAPID1 This is sufficient to have the Rev B. usable by OpenOCD again. Before I send a patch upstream, can you clarify whether I should be calling this a Rev "D" ICEpick, "Rev C1", or something else? Bits of this are very well documented (for example, in chapter 27 of the DM3730 TRM) but the exact revision information on ICEpick seems not to be public in those documents, unless I am missing something. Jon. -- You received this message because you are subscribed to the Google Groups "Beagle Board" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
--- End Message ---
_______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
