[email protected] wrote: > They didn't have any 0.05" pre-crimped solutions that I could > find.
Crimping your own is not hard with something solid to push down with (bit of wood or such). > It seems like everybody is doing something different.... Throw in > that a lot of application PCBs don't have anything resembling a normal > JTAG 0.1" or 0.05" connector and then you're off to the hw engineer > on the project to have him put something together... imo basic soldering / electrical skills are part of being an embedded engineer, if you want to play around trying to fit square pegs in round holes. To abuse a famous quote; give a man a vendor cable and he can program one board. Teach him to fabricate his own cables.. -- Jon Povey [email protected] Racelogic is a limited company registered in England. Registered number 2743719 . Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, Bucks, MK18 1TB . The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
