Hello,
I don't know if this can be considered as a bug or as a misconfiguration on my
part. I lean towards bug, because I use the same setup with OpenOCD 4 32bit in
windows xp without problems.
scenario: programming flash of target with openocd 5 on windows 7 64bit
expected result:
code transfered without errors
actual result:
First flashing (see log_first_run.log) results in error message, second try
(see log_second_run.log) directly afterwards works as expected.
target: Olimex P103 (STM32F103RB)
jtag: Olimex ARM-USB-OCD
OS: Windows 7 x64
OpenOCD: openocd-x64-0.5.0-dev
commandline:
-d3 -f "C:\Program Files (x86)\openocd-x64-0.5.0-dev\interface\olimex-arm-usb-ocd.cfg" -f
"C:\Program Files (x86)\openocd-x64-0.5.0-dev\target\stm32.cfg" -f stm32_program.cfg
Regards
Michael
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
Anyone who had time to look into this?
Regards
Michael
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
