Test results using dummy interface.
a) Failure as expected without settings speed:
openocd -c "interface dummy"
Open On-Chip Debugger 0.5.0-dev-00867-g9ae4ddd (2011-04-29-12:45)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
Error: An adapter speed is not selected in the init script. Insert a
call to adapter_khz or jtag_rclk to proceed.
in procedure 'init'
b) No failure when setting speed:
openocd -c "interface dummy;adapter_khz 1"
Open On-Chip Debugger 0.5.0-dev-00867-g9ae4ddd (2011-04-29-12:45)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
1 kHz
Info : clock speed 1 kHz
Warn : There are no enabled taps. AUTO PROBING MIGHT NOT WORK!!
--
Øyvind Harboe
Can Zylin Consulting help on your project?
US toll free 1-866-980-3434 / International +47 51 87 40 27
http://www.zylin.com/zy1000.html
ARM7 ARM9 ARM11 XScale Cortex
JTAG debugger and flash programmer
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
