On 11:22 Fri 27 May , Paul Claessen wrote: > I built OpenOCD 0.5.0-dev-00882 the other day with Jlink support enabled. > > It built okay, but when I tried to use it I got some errors (See below for > error log). They seem to hint at USB endpoint problems (but I could be > totally wrong). > > I found several links on the web (links given below) that seem to indicate > that these errors are caused by newer versions of Jlink firmware, that are > not supported by OpenOCD. > The suggested solution is to downgrade onea**s Jlink firmware. A better > solution, IMHO, would be to add support for these newer firmware versions > in OpenOCD. > > My questions are: 1) Is the development team (especially the Jlink > developer) aware of this (i.e. IS this indeed a firmware version issue?), > 2) are there any plans to add support for newer Jlink firmware and 3) in > case there are no plans to add support for this, and I can find some time > to see if I can add this myself, has someone already looked at this and > has an idea of what would need to change or tips for what to look for? (if > lucky, ita**s only a change of USB endpoints). I'll be happy to add the support of the new firmware but Segger does not provide and update of their documentation about it
And I'm also looking to add the firmware updating to openocd but I did nt found to documentation either If anyone can help to get the documentation I'll implement it Best Regrds, J. _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
