>>/ >/ Do you have any other ideas on what should be done on ft2232_quit()
/>>/ />/ except rtck, hi-z, div5..? I can prepare a patch, or Peter will as I
/>>/ />/ can see he is already working out the subject :-)
/>>/ /
/>>/
/>>/ What problem is setting pins to a default state on exit supposed to
/>>/ solve? Are we sure this is what we want? If I make openocd pull the
/>>/ reset
/>>/ line and then quit openocd, I'd expect the target to remain in reset.
/>>/ If I
/>>/ quit openocd while the target is running, I'd expect it to keep on
/>>/ running.
/>>/ How would that work if we make this change?
/>/ What do you mean by PULL?
/>/ If you close the openocd, we have to put both SRST and TRST in High-Z
/>/ . That's the normal case, any other case are specific to a custom
/>/ debug procedure.
/Why *do* we have to do that?
If I quit OpenOCD, I expect the target to stay in the same state as before.
If it was in reset, I expect it to stay in reset and not start some code
uncontrolled.
cu
Michael
When you launch OpenOCD or any other software, they do not know the
state of your target .
When you quit OpenOCD or any other software, by default, you do not know
in what state to let the target.
That's why, by default, the Donlge must have all output High-Z before a
quit of OPENOCD!
Laurent
http://www.amontec.com
Amontec JTAGkey-2 HIGH-SPEED USB JTAG
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
