Hi Spencer, Did you get time to perform additional tests? What would be fix for this issue (disabling working areas makes entire operation really slow)?
Thanks, Mahavir On Tue, 2011-06-07 at 01:16 -0700, Mahavir Jain wrote: > Hi Spencer, > > On Mon, 2011-06-06 at 14:09 -0700, Spencer Oliver wrote: > > [...] > > > Just for testing have you tried disabling the working area? > > If i get a chance i will run some tests tomorrow. > > Thanks for reply. > > Yes, disabling working area does make flash write successful. Here is > log, > > flash write_bank 1 /tmp/helloworld_flash.bin 0 > No working memory available. Specify -work-area-phys to target. > not enough working area available(requested 72) > Programming at 0x64000000, count 0x0000610c bytes remaining > > ... > > wrote 24844 bytes from file /tmp/helloworld_flash.bin to flash bank 1 at > offset 0x00000000 in 164.371414s (0.148 KiB/s) > > Let me know any additional tests that needs to be tried out. > > Thanks, > Mahavir > _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
