Re: [Openocd-development] ARM IDLE mode and JTAG scan chain interrogation failed

[Luc ANTOLINOS]

On 6 July 2011 13:52, Laurent Gauch <laurent.ga...@amontec.com> wrote:
> Are you sure your Target JTAG interface is active in your low power mode ?
You seams to be right (even if I have not found this information in
the user manual of the LPC2388 for the moment) :
>From http://www.keil.com/support/man/docs/mcb2300/mcb2300_fp_ulink.htm
I found  :
"The Embedded ICE in the LPC2000 core is disabled when the device is
in Power Down or Idle"
"ULINK stops working if your code puts the ARM device into Idle or
Power Down mode" (here "ULINK" is the name of their usb-jtag adapter)
-- 
Luc
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development