From: Spencer Oliver <[email protected]>
Signed-off-by: Spencer Oliver <[email protected]>
---
doc/openocd.texi | 29 ++++++++++++++++++-----------
1 files changed, 18 insertions(+), 11 deletions(-)
diff --git a/doc/openocd.texi b/doc/openocd.texi
index dfb8e30..069367d 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -1277,7 +1277,7 @@ at91sam3u4c.cfg lm3s9b9x.cfg samsung_s3c6410.cfg
at91sam3u4e.cfg lpc1768.cfg sharp_lh79532.cfg
at91sam3uXX.cfg lpc2103.cfg smdk6410.cfg
at91sam7sx.cfg lpc2124.cfg smp8634.cfg
-at91sam9260.cfg lpc2129.cfg stm32.cfg
+at91sam9260.cfg lpc2129.cfg stm32f1x.cfg
c100.cfg lpc2148.cfg str710.cfg
c100config.tcl lpc2294.cfg str730.cfg
c100helper.tcl lpc2378.cfg str750.cfg
@@ -4762,44 +4762,51 @@ applied to all of them.
@end quotation
@end deffn
-@deffn {Flash Driver} stm32x
-All members of the STM32 microcontroller family from ST Microelectronics
+@deffn {Flash Driver} stm32f1x
+All members of the STM32f1x microcontroller family from ST Microelectronics
include internal flash and use ARM Cortex M3 cores.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
@example
-flash bank $_FLASHNAME stm32x 0 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME
@end example
-Some stm32x-specific commands
-@footnote{Currently there is a @command{stm32x mass_erase} command.
+Some stm32f1x-specific commands
+@footnote{Currently there is a @command{stm32f1x mass_erase} command.
That seems pointless since the same effect can be had using the
standard @command{flash erase_address} command.}
are defined:
-@deffn Command {stm32x lock} num
+@deffn Command {stm32f1x lock} num
Locks the entire stm32 device.
The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
-@deffn Command {stm32x unlock} num
+@deffn Command {stm32f1x unlock} num
Unlocks the entire stm32 device.
The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
-@deffn Command {stm32x options_read} num
+@deffn Command {stm32f1x options_read} num
Read and display the stm32 option bytes written by
-the @command{stm32x options_write} command.
+the @command{stm32f1x options_write} command.
The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
-@deffn Command {stm32x options_write} num (@option{SWWDG}|@option{HWWDG})
(@option{RSTSTNDBY}|@option{NORSTSTNDBY}) (@option{RSTSTOP}|@option{NORSTSTOP})
+@deffn Command {stm32f1x options_write} num (@option{SWWDG}|@option{HWWDG})
(@option{RSTSTNDBY}|@option{NORSTSTNDBY}) (@option{RSTSTOP}|@option{NORSTSTOP})
Writes the stm32 option byte with the specified values.
The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
@end deffn
+@deffn {Flash Driver} stm32f2x
+All members of the STM32f2x microcontroller family from ST Microelectronics
+include internal flash and use ARM Cortex M3 cores.
+The driver automatically recognizes a number of these chips using
+the chip identification register, and autoconfigures itself.
+@end deffn
+
@deffn {Flash Driver} str7x
All members of the STR7 microcontroller family from ST Microelectronics
include internal flash and use ARM7TDMI cores.
--
1.7.0.4
________________________________________________________________________
This e-mail has been scanned for all viruses by Star. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
