Hello, I'm new to openocd but have been using it with the gumstix verdex product and wanted to share this capability with some other users who have been asking for this.
I hope this is an acceptable way to submit a patch. Please let me know if any corrections/formatting are needed or if there are additional sign-offs required. Many thanks to all the developers working on this very useful piece of software. -Ash On Fri, Sep 30, 2011 at 4:17 PM, Ash Charles <[email protected]> wrote: > Gumstix Verdex is a PXA270-based series of computer-on-modules. This > configuration file is based off the voipac.cfg configuration with > a different flash memory configuration. This has been tested flyswatter > adapter to reflash a Gumstix Verdex XL6P board. > --- > tcl/board/verdex.cfg | 17 +++++++++++++++++ > 1 files changed, 17 insertions(+), 0 deletions(-) > create mode 100644 tcl/board/verdex.cfg > > diff --git a/tcl/board/verdex.cfg b/tcl/board/verdex.cfg > new file mode 100644 > index 0000000..6da9875 > --- /dev/null > +++ b/tcl/board/verdex.cfg > @@ -0,0 +1,17 @@ > +# Config for Gumstix Verdex XM4 and XL6P (PXA270) > + > +set CHIPNAME verdex > +source [find target/pxa270.cfg] > + > +# The board supports separate reset lines > +# Override this in the interface config for parallel dongles > +reset_config trst_and_srst separate > + > +# XM4 = 400MHz, XL6P = 600MHz...let's run at 0.1*400MHz=40MHz > +adapter_khz 40000 > + > +# flash bank <driver> <base> <size> <chip_width> <bus_width> > +# XL6P has 32 MB flash > +flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x02000000 2 2 $_TARGETNAME > +# XM4 has 16 MB flash > +#flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x01000000 2 2 $_TARGETNAME > -- > 1.7.4.1 > > _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
