This is an automated email from Gerrit.

Mathias K?ster (kes...@freenet.de) just uploaded a new patch set to Gerrit, 
which you can find at http://openocd.zylin.com/51

-- gerrit

commit cb685c9f575047b8f0a4853069e775c4f0052498
Author: Mathias K <kes...@freenet.de>
Date:   Sat Oct 22 18:00:20 2011 +0200

    add Freescale Kinetis K40 devices and Kwikstik eval board
    
    Change-Id: I4817921d09ab915c50f42651bc073690033450fe
    Signed-off-by: Mathias K <kes...@freenet.de>

diff --git a/tcl/board/kwikstik.cfg b/tcl/board/kwikstik.cfg
new file mode 100644
index 0000000..ed9b583
--- /dev/null
+++ b/tcl/board/kwikstik.cfg
@@ -0,0 +1,19 @@
+#
+# Freescale KwikStik development board
+#
+
+#
+# JLINK interface is onboard
+#
+source [find interface/jlink.cfg]
+
+jtag_rclk 100
+
+source [find target/k40.cfg]
+
+reset_config trst_and_srst
+
+#
+# Bank definition for the 'program flash' (instructions and/or data)
+#
+flash bank $_CHIPNAME.pflash kinetis 0x00000000 0x40000 0 4 $_TARGETNAME
diff --git a/tcl/target/k40.cfg b/tcl/target/k40.cfg
new file mode 100644
index 0000000..9984bfc
--- /dev/null
+++ b/tcl/target/k40.cfg
@@ -0,0 +1,35 @@
+#
+# Freescale Kinetis K40 devices
+#
+
+#
+# K40 devices support both JTAG and SWD transports.
+#
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+    set _CHIPNAME $CHIPNAME
+} else {
+    set _CHIPNAME k40
+}
+
+if { [info exists ENDIAN] } {
+    set _ENDIAN $ENDIAN
+} else {
+    set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+    set _CPUTAPID $CPUTAPID
+} else {
+    set _CPUTAPID 0x4ba00477
+}
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 
$_CPUTAPID
+
+target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu
+
+$_CHIPNAME.cpu configure -event examine-start { puts "START..." ; }
+$_CHIPNAME.cpu configure -event examine-end { puts "END..." ; }

-- 
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development

Reply via email to