The channel driver is the issue. The library and the drivers are all packaged together from Sangoma. Getting the data from the channels is not that difficult and libpri can do the signaling if necessary. We do have plans to plug a DS3 into a machine and Zaptel has worse performance than the old 8250 RS-232 interface. I have never in my life seen interrupt rates that bad before.
On Mon, 2006-03-20 at 16:21 -0600, Nathan C. Smith wrote: > We dependent on other projects for PSTN interfaces. I knew David Sugar was > working on some new hardware support but not that it would arrive so soon. > > Maybe we can talk somebody into writing an opbx channel driver for David's > new library to have something in addition to zaptel. > > -Nate > > > -----Original Message----- > > From: Beau Hargis [mailto:[EMAIL PROTECTED] > > Sent: Monday, March 20, 2006 3:42 PM > > To: [email protected] > > Subject: [Openpbx-dev] LibSangoma support? > > > > > > Is there actually support for LibSangoma that can be tested? > > I have T1s and cards and everything is working under > > Asterisk, but zaptel is not an option anymore. The > > scalability and performance is abysmal. I am not seeing any > > channel driver or configuration information in the openpbx > > source. We want to really load test it here if we can. > > > > Thanks. > > -- > > beau hargis > > [EMAIL PROTECTED] > > _______________________________________________ > > Openpbx-dev mailing list > > [email protected] > > http://lists.openpbx.org/mailman/listinfo/openpbx-dev > > > _______________________________________________ > Openpbx-dev mailing list > [email protected] > http://lists.openpbx.org/mailman/listinfo/openpbx-dev _______________________________________________ Openpbx-dev mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-dev
