The Call Flow is such that a T38 Fax from a Softphone behind firewall is sent through OpenPBX and to a SBC as follows
T38 Softphone -->Private LAN behind NAT-->Public LAN-----Internet-----> OpenPBX----->SBC --> Media Gateway--->PSTN The call get sets up G729 and the SBC then RE-INVITES back to the OpenPBX with T38. Will the above scenario work with Open PBX? I know Asterisk had problems with a REINVITE and NAT. Can someone confirm? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jbebeau Sent: Friday, March 02, 2007 1:49 PM To: [email protected] Subject: [Openpbx-users] T.38 Passthru to Cisco 2811 CCM Expess? I'm trying a work around by passing T.38 thru OpenPBX to a Cisco 2811 CCME/K9 to be terminated in a T1-PRI. Do I need the Cisco Call Manager (express) to do this or will the Advanced IP OS perfrom without CCE involved? Jon _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
