> installed SVN version and get T.38 working but only when openpbx > are in gateway mode; when i try to do pass-thru, it does not work. > > fax going to Cirpack switch, located at same voip network and i > have tested TxFax, Dial and RxFax - no success at all. > > by sip logs i found that Cirpack may require those options: > ;t38rtpsupport=yes ; Turn on support for T.38 RTP - > *** NOT YET IMPLEMENTED *** > ;t38tcpsupport=yes ; Turn on support for T.38 TCP - > *** NOT YET IMPLEMENTED *** > > so, when it estimated to add to ? :)
I somehow doubt the reason for this not working is t.38 TCP or RTP support, since the common way to do t.38 is UDPTL. Enable full debug, that is, add full => notice,warning,error,debug,verbose in logger.conf, start openpbx with -gvvvvvvvvvvvvvvddddddddddddddddd and run 'rtp debug' and 'udptl debug' and try again, upload the logs somewhere if it doesn't work. roy _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
