OpenPKG CVS Repository
http://cvs.openpkg.org/
____________________________________________________________________________
Server: cvs.openpkg.org Name: Ralf S. Engelschall
Root: /e/openpkg/cvs Email: [EMAIL PROTECTED]
Module: openpkg-src Date: 21-Feb-2004 17:12:31
Branch: HEAD Handle: 2004022116123100
Added files:
openpkg-src/amanda amanda.conf amanda.disklist amanda.spec
xinetd.amanda xinetd.amandaidx xinetd.amidxtape
Log:
new package: amanda 2.4.4p2 (The Advanced Maryland Automatic Network
Disk Archiver)
Summary:
Revision Changes Path
1.1 +555 -0 openpkg-src/amanda/amanda.conf
1.1 +17 -0 openpkg-src/amanda/amanda.disklist
1.1 +216 -0 openpkg-src/amanda/amanda.spec
1.1 +15 -0 openpkg-src/amanda/xinetd.amanda
1.1 +14 -0 openpkg-src/amanda/xinetd.amandaidx
1.1 +15 -0 openpkg-src/amanda/xinetd.amidxtape
____________________________________________________________________________
patch -p0 <<'@@ .'
Index: openpkg-src/amanda/amanda.conf
============================================================================
$ cvs diff -u -r0 -r1.1 amanda.conf
--- /dev/null 2004-02-21 17:12:31.000000000 +0100
+++ amanda.conf 2004-02-21 17:12:31.000000000 +0100
@@ -0,0 +1,555 @@
+### !!! WARNING !!! !!! WARNING !!! !!! WARNING !!! !!! WARNING !!! ###
+### ###
+### This file is not meant to be installed "as is", and in fact, it ###
+### WILL NOT WORK! You must go through it and make changes appropriate ###
+### to your own situation. See the documentation in this file, in the ###
+### "man amanda" man page, in the "docs" directory and at the Amanda ###
+### web page (www.amanda.org). ###
+### ###
+### !!! WARNING !!! !!! WARNING !!! !!! WARNING !!! !!! WARNING !!! ###
+
+#
+# amanda.conf - sample Amanda configuration file. This started off life as
+# the actual config file in use at CS.UMD.EDU.
+#
+# If your configuration is called, say, "csd", then this file normally goes
+# in @PREFIX@/etc/amanda/csd/amanda.conf.
+#
+
+org "DailySet1" # your organization name for reports
+mailto "cw" # space separated list of operators at your site
+dumpuser "cw" # the user to run dumps under
+
+inparallel 4 # maximum dumpers that will run in parallel (max 63)
+ # this maximum can be increased at compile-time,
+ # modifying MAX_DUMPERS in server-src/driverio.h
+dumporder "sssS" # specify the priority order of each dumper
+ # s -> smallest size
+ # S -> biggest size
+ # t -> smallest time
+ # T -> biggest time
+ # b -> smallest bandwitdh
+ # B -> biggest bandwitdh
+ # try "BTBTBTBTBTBT" if you are not holding
+ # disk constrained
+netusage 600 Kbps # maximum net bandwidth for Amanda, in KB per sec
+
+dumpcycle 4 weeks # the number of days in the normal dump cycle
+runspercycle 20 # the number of amdump runs in dumpcycle days
+ # (4 weeks * 5 amdump runs per week -- just weekdays)
+tapecycle 25 tapes # the number of tapes in rotation
+ # 4 weeks (dumpcycle) times 5 tapes per week (just
+ # the weekdays) plus a few to handle errors that
+ # need amflush and so we do not overwrite the full
+ # backups performed at the beginning of the previous
+ # cycle
+### ### ###
+# WARNING: don't use `inf' for tapecycle, it's broken!
+### ### ###
+
+bumpsize 20 Mb # minimum savings (threshold) to bump level 1 -> 2
+bumpdays 1 # minimum days at each level
+bumpmult 4 # threshold = bumpsize * bumpmult^(level-1)
+
+etimeout 300 # number of seconds per filesystem for estimates.
+#etimeout -600 # total number of seconds for estimates.
+# a positive number will be multiplied by the number of filesystems on
+# each host; a negative number will be taken as an absolute total time-out.
+# The default is 5 minutes per filesystem.
+
+dtimeout 1800 # number of idle seconds before a dump is aborted.
+
+ctimeout 30 # maximum number of seconds that amcheck waits
+ # for each client host
+
+tapebufs 20
+# A positive integer telling taper how many 32k buffers to allocate.
+# WARNING! If this is set too high, taper will not be able to allocate
+# the memory and will die. The default is 20 (640k).
+
+
+# Specify tape device and/or tape changer. If you don't have a tape
+# changer, and you don't want to use more than one tape per run of
+# amdump, just comment out the definition of tpchanger.
+
+# Some tape changers require tapedev to be defined; others will use
+# their own tape device selection mechanism. Some use a separate tape
+# changer device (changerdev), others will simply ignore this
+# parameter. Some rely on a configuration file (changerfile) to
+# obtain more information about tape devices, number of slots, etc;
+# others just need to store some data in files, whose names will start
+# with changerfile. For more information about individual tape
+# changers, read docs/TAPE.CHANGERS.
+
+# At most one changerfile entry must be defined; select the most
+# appropriate one for your configuration. If you select man-changer,
+# keep the first one; if you decide not to use a tape changer, you may
+# comment them all out.
+
+runtapes 1 # number of tapes to be used in a single run of amdump
+tpchanger "chg-manual" # the tape-changer glue script
+tapedev "/dev/null" # the no-rewind tape device to be used
+rawtapedev "/dev/null" # the raw device to be used (ftape only)
+changerfile "@PREFIX@/etc/amanda/DailySet1/changer.conf"
+changerdev "/dev/null"
+
+maxdumpsize -1 # Maximum number of bytes the planner will schedule
+ # for a run (default: runtapes * tape_length).
+tapetype HP-DAT # what kind of tape it is (see tapetypes below)
+labelstr "^DailySet1[0-9][0-9]*$" # label constraint regex: all tapes must match
+
+amrecover_do_fsf yes # amrecover will call amrestore with the
+ # -f flag for faster positioning of the tape.
+amrecover_check_label yes # amrecover will call amrestore with the
+ # -l flag to check the label.
+amrecover_changer "/dev/null" # amrecover will use the changer if you restore
+ # from this device.
+ # It could be a string like 'changer' and
+ # amrecover will use your changer if you
+ # set your tape with 'settape changer'
+
+# Specify holding disks. These are used as a temporary staging area for
+# dumps before they are written to tape and are recommended for most sites.
+# The advantages include: tape drive is more likely to operate in streaming
+# mode (which reduces tape and drive wear, reduces total dump time); multiple
+# dumps can be done in parallel (which can dramatically reduce total dump time.
+# The main disadvantage is that dumps on the holding disk need to be flushed
+# (with amflush) to tape after an operating system crash or a tape failure.
+# If no holding disks are specified then all dumps will be written directly
+# to tape. If a dump is too big to fit on the holding disk than it will be
+# written directly to tape. If more than one holding disk is specified then
+# they will all be used based on activity and available space.
+
+holdingdisk hd1 {
+ comment "main holding disk"
+ directory "@PREFIX@/var/amanda/dumps" # where the holding disk is
+ use 290 Mb # how much space can we use on it
+ # a non-positive value means:
+ # use all space but that value
+ chunksize 1Gb # size of chunk if you want big dump to be
+ # dumped on multiple files on holding disks
+ # N Kb/Mb/Gb split images in chunks of size N
+ # The maximum value should be
+ # (MAX_FILE_SIZE - 1Mb)
+ # 0 same as INT_MAX bytes
+ }
+#holdingdisk hd2 {
+# directory "/dumps2/amanda"
+# use 1000 Mb
+# }
+#holdingdisk hd3 {
+# directory "/mnt/disk4"
+# use 1000 Mb
+# }
+
+
+# If amanda cannot find a tape on which to store backups, it will run
+# as many backups as it can to the holding disks. In order to save
+# space for unattended backups, by default, amanda will only perform
+# incremental backups in this case, i.e., it will reserve 100% of the
+# holding disk space for the so-called degraded mode backups.
+# However, if you specify a different value for the `reserve'
+# parameter, amanda will not degrade backups if they will fit in the
+# non-reserved portion of the holding disk.
+
+# reserve 30 # percent
+# This means save at least 30% of the holding disk space for degraded
+# mode backups.
+
+autoflush no #
+# if autoflush is set to yes, then amdump will schedule all dump on
+# holding disks to be flush to tape during the run.
+
+# The format for a ColumnSpec is a ',' seperated list of triples.
+# Each triple consists of
+# + the name of the column (as in ColumnNameStrings)
+# + prefix before the column
+# + the width of the column, if set to -1 it will be recalculated
+# to the maximum length of a line to print.
+# Example:
+# "Disk=1:17,HostName=1:10,OutKB=1:7"
+# or
+# "Disk=1:-1,HostName=1:10,OutKB=1:7"
+#
+# You need only specify those colums that should be changed from
+# the default. If nothing is specified in the configfile, the
+# above compiled in values will be in effect, resulting in an
+# output as it was all the time.
+# The names of the colums are:
+# HostName, Disk, Level, OrigKB, OutKB, Compress, DumpTime, DumpRate,
+# TapeTime and TapeRate.
+# ElB, 1999-02-24.
+# columnspec "Disk=1:18,HostName=0:10,OutKB=1:7"
+
+
+# Amanda needs a few Mb of diskspace for the log and debug files,
+# as well as a database. This stuff can grow large, so the conf directory
+# isn't usually appropriate. Some sites use /usr/local/var and some /usr/adm.
+# Create an amanda directory under there. You need a separate infofile and
+# logdir for each configuration, so create subdirectories for each conf and
+# put the files there. Specify the locations below.
+
+# Note that, although the keyword below is infofile, it is only so for
+# historic reasons, since now it is supposed to be a directory (unless
+# you have selected some database format other than the `text' default)
+infofile "@PREFIX@/var/amanda/DailySet1/curinfo" # database DIRECTORY
+logdir "@PREFIX@/var/amanda/DailySet1" # log directory
+indexdir "@PREFIX@/var/amanda/DailySet1/index" # index directory
+#tapelist "/usr/adm/amanda/DailySet1/tapelist" # list of used tapes
+# tapelist is stored, by default, in the directory that contains amanda.conf
+
+
+# tapetypes
+
+# Define the type of tape you use here, and use it in "tapetype"
+# above. Some typical types of tapes are included here. The tapetype
+# tells amanda how many MB will fit on the tape, how big the filemarks
+# are, and how fast the tape device is.
+
+# A filemark is the amount of wasted space every time a tape section
+# ends. If you run `make tapetype' in tape-src, you'll get a program
+# that generates tapetype entries, but it is slow as hell, use it only
+# if you really must and, if you do, make sure you post the data to
+# the amanda mailing list, so that others can use what you found out
+# by searching the archives.
+
+# For completeness Amanda should calculate the inter-record gaps too,
+# but it doesn't. For EXABYTE and DAT tapes this is ok. Anyone using
+# 9 tracks for amanda and need IRG calculations? Drop me a note if
+# so.
+
+# If you want amanda to print postscript paper tape labels
+# add a line after the comment in the tapetype of the form
+# lbl-templ "/path/to/postscript/template/label.ps"
+
+# if you want the label to go to a printer other than the default
+# for your system, you can also add a line above for a different
+# printer. (i usually add that line after the dumpuser specification)
+
+# dumpuser "operator" # the user to run dumps under
+# printer "mypostscript" # printer to print paper label on
+
+# here is an example of my definition for an EXB-8500
+
+# define tapetype EXB-8500 {
+# ...
+# lbl-templ "/usr/local/amanda/config/lbl.exabyte.ps"
+# }
+
+
+define tapetype QIC-60 {
+ comment "Archive Viper"
+ length 60 mbytes
+ filemark 100 kbytes # don't know a better value
+ speed 100 kbytes # dito
+}
+
+define tapetype DEC-DLT2000 {
+ comment "DEC Differential Digital Linear Tape 2000"
+ length 15000 mbytes
+ filemark 8 kbytes
+ speed 1250 kbytes
+}
+
+# [EMAIL PROTECTED]
+# in amanda-users (Thu Dec 26 01:55:38 MEZ 1996)
+define tapetype DLT {
+ comment "DLT tape drives"
+ length 20000 mbytes # 20 Gig tapes
+ filemark 2000 kbytes # I don't know what this means
+ speed 1536 kbytes # 1.5 Mb/s
+}
+
+define tapetype SURESTORE-1200E {
+ comment "HP AutoLoader"
+ length 3900 mbytes
+ filemark 100 kbytes
+ speed 500 kbytes
+}
+
+define tapetype EXB-8500 {
+ comment "Exabyte EXB-8500 drive on decent machine"
+ length 4200 mbytes
+ filemark 48 kbytes
+ speed 474 kbytes
+}
+
+define tapetype EXB-8200 {
+ comment "Exabyte EXB-8200 drive on decent machine"
+ length 2200 mbytes
+ filemark 2130 kbytes
+ speed 240 kbytes
+}
+
+define tapetype HP-DAT {
+ comment "DAT tape drives"
+ # data provided by Rob Browning <[EMAIL PROTECTED]>
+ length 1930 mbytes
+ filemark 111 kbytes
+ speed 468 kbytes
+}
+
+define tapetype DAT {
+ comment "DAT tape drives"
+ length 1000 mbytes # these numbers are not accurate
+ filemark 100 kbytes # but you get the idea
+ speed 100 kbytes
+}
+
+define tapetype MIMSY-MEGATAPE {
+ comment "Megatape (Exabyte based) drive through Emulex on Vax 8600"
+ length 2200 mbytes
+ filemark 2130 kbytes
+ speed 170 kbytes # limited by the Emulex bus interface, ugh
+}
+
+
+# dumptypes
+#
+# These are referred to by the disklist file. The dumptype specifies
+# certain parameters for dumping including:
+# auth - authentication scheme to use between server and client.
+# Valid values are "bsd" and "krb4". Default: [auth bsd]
+# comment - just a comment string
+# comprate - set default compression rate. Should be followed by one or
+# two numbers, optionally separated by a comma. The 1st is
+# the full compression rate; the 2nd is the incremental rate.
+# If the second is omitted, it is assumed equal to the first.
+# The numbers represent the amount of the original file the
+# compressed file is expected to take up.
+# Default: [comprate 0.50, 0.50]
+# compress - specify compression of the backed up data. Valid values are:
+# "none" - don't compress the dump output.
+# "client best" - compress on the client using the best (and
+# probably slowest) algorithm.
+# "client fast" - compress on the client using fast algorithm.
+# "server best" - compress on the tape host using the best (and
+# probably slowest) algorithm.
+# "server fast" - compress on the tape host using a fast
+# algorithm. This may be useful when a fast
+# tape host is backing up slow clients.
+# Default: [compress client fast]
+# dumpcycle - set the number of days in the dump cycle, ie, set how often a
+# full dump should be performed. Default: from DUMPCYCLE above
+# exclude - specify files and directories to be excluded from the dump.
+# Useful with gnutar only; silently ignored by dump and samba.
+# Valid values are:
+# "pattern" - a shell glob pattern defining which files
+# to exclude.
+# gnutar gets --exclude="pattern"
+# list "filename" - a file (on the client!) containing patterns
+# re's (1 per line) defining which files to
+# exclude.
+# gnutar gets --exclude-from="filename"
+# Note that the `full pathname' of a file within its
+# filesystem starts with `./', because of the way amanda runs
+# gnutar: `tar -C $mountpoint -cf - --lots-of-options .' (note
+# the final dot!) Thus, if you're backing up `/usr' with a
+# diskfile entry like ``host /usr gnutar-root', but you don't
+# want to backup /usr/tmp, your exclude list should contain
+# the pattern `./tmp', as this is relative to the `/usr' above.
+# Please refer to the man-page of gnutar for more information.
+# If a relative pathname is specified as the exclude list,
+# it is searched from within the directory that is
+# going to be backed up.
+# Default: include all files
+# holdingdisk - should the holding disk be used for this dump. Useful for
+# dumping the holding disk itself. Default: [holdingdisk yes]
+# ignore - do not back this filesystem up. Useful for sharing a single
+# disklist in several configurations.
+# index - keep an index of the files backed up. Default: [index no]
+# kencrypt - encrypt the data stream between the client and server.
+# Default: [kencrypt no]
+# maxdumps - max number of concurrent dumps to run on the client.
+# Default: [maxdumps 1]
+# maxpromoteday - max number of day for a promotion, set it 0 if you don't
+# want promotion, set it to 1 or 2 if your disk get
+# overpromoted.
+# Default: [10000]
+# priority - priority level of the dump. Valid levels are "low", "medium"
+# or "high". These are really only used when Amanda has no
+# tape to write to because of some error. In that "degraded
+# mode", as many incrementals as will fit on the holding disk
+# are done, higher priority first, to insure the important
+# disks are at least dumped. Default: [priority medium]
+# program - specify the dump system to use. Valid values are "DUMP" and
+# "GNUTAR". Default: [program "DUMP"].
+# record - record the dump in /etc/dumpdates. Default: [record yes]
+# skip-full - skip the disk when a level 0 is due, to allow full backups
+# outside Amanda, eg when the machine is in single-user mode.
+# skip-incr - skip the disk when the level 0 is NOT due. This is used in
+# archive configurations, where only full dumps are done and
+# the tapes saved.
+# starttime - delay the start of the dump? Default: no delay
+# strategy - set the dump strategy. Valid strategies are currently:
+# "standard" - the standard one.
+# "nofull" - do level 1 dumps every time. This can be used,
+# for example, for small root filesystems that
+# only change slightly relative to a site-wide
+# prototype. Amanda then backs up just the
+# changes.
+# "noinc" - do level 0 dumps every time.
+# Unfortunately, this is not currently
+# implemented. Use `dumpcycle 0'
+# instead.
+# "skip" - skip all dumps. Useful for sharing a single
+# disklist in several configurations.
+# "incronly" - do only incremental dumps. This is similar
+# to strategy 'nofull', but will increase
+# the dump level as usual. Full dumps will
+# only be performed when an 'amadmin force'
+# has been issued
+# Default: [strategy standard]
+#
+# Note that you may specify previously defined dumptypes as a shorthand way
+# of defining parameters.
+
+define dumptype global {
+ comment "Global definitions"
+ # This is quite useful for setting global parameters, so you don't have
+ # to type them everywhere. All dumptype definitions in this sample file
+ # do include these definitions, either directly or indirectly.
+ # There's nothing special about the name `global'; if you create any
+ # dumptype that does not contain the word `global' or the name of any
+ # other dumptype that contains it, these definitions won't apply.
+ # Note that these definitions may be overridden in other
+ # dumptypes, if the redefinitions appear *after* the `global'
+ # dumptype name.
+ # You may want to use this for globally enabling or disabling
+ # indexing, recording, etc. Some examples:
+ # index yes
+ # record no
+}
+
+define dumptype always-full {
+ global
+ comment "Full dump of this filesystem always"
+ compress none
+ priority high
+ dumpcycle 0
+}
+
+define dumptype root-tar {
+ global
+ program "GNUTAR"
+ comment "root partitions dumped with tar"
+ compress none
+ index
+ exclude list "@PREFIX@/lib/amanda/exclude.gtar"
+ priority low
+}
+
+define dumptype user-tar {
+ root-tar
+ comment "user partitions dumped with tar"
+ priority medium
+}
+
+define dumptype high-tar {
+ root-tar
+ comment "partitions dumped with tar"
+ priority high
+}
+
+define dumptype comp-root-tar {
+ root-tar
+ comment "Root partitions with compression"
+ compress client fast
+}
+
+define dumptype comp-user-tar {
+ user-tar
+ compress client fast
+}
+
+define dumptype holding-disk {
+ global
+ comment "The master-host holding disk itself"
+ holdingdisk no # do not use the holding disk
+ priority medium
+}
+
+define dumptype comp-user {
+ global
+ comment "Non-root partitions on reasonably fast machines"
+ compress client fast
+ priority medium
+}
+
+define dumptype nocomp-user {
+ comp-user
+ comment "Non-root partitions on slow machines"
+ compress none
+}
+
+define dumptype comp-root {
+ global
+ comment "Root partitions with compression"
+ compress client fast
+ priority low
+}
+
+define dumptype nocomp-root {
+ comp-root
+ comment "Root partitions without compression"
+ compress none
+}
+
+define dumptype comp-high {
+ global
+ comment "very important partitions on fast machines"
+ compress client best
+ priority high
+}
+
+define dumptype nocomp-high {
+ comp-high
+ comment "very important partitions on slow machines"
+ compress none
+}
+
+define dumptype nocomp-test {
+ global
+ comment "test dump without compression, no /etc/dumpdates recording"
+ compress none
+ record no
+ priority medium
+}
+
+define dumptype comp-test {
+ nocomp-test
+ comment "test dump with compression, no /etc/dumpdates recording"
+ compress client fast
+}
+
+# network interfaces
+#
+# These are referred to by the disklist file. They define the attributes
+# of the network interface that the remote machine is accessed through.
+# Notes: - netusage above defines the attributes that are used when the
+# disklist entry doesn't specify otherwise.
+# - the values below are only samples.
+# - specifying an interface does not force the traffic to pass
+# through that interface. Your OS routing tables do that. This
+# is just a mechanism to stop Amanda trashing your network.
+# Attributes are:
+# use - bandwidth above which amanda won't start
+# backups using this interface. Note that if
+# a single backup will take more than that,
+# amanda won't try to make it run slower!
+
+define interface local {
+ comment "a local disk"
+ use 1000 kbps
+}
+
+define interface le0 {
+ comment "10 Mbps ethernet"
+ use 400 kbps
+}
+
+# You may include other amanda configuration files, so you can share
+# dumptypes, tapetypes and interface definitions among several
+# configurations.
+
+#includefile "/usr/local/amanda.conf.main"
@@ .
patch -p0 <<'@@ .'
Index: openpkg-src/amanda/amanda.disklist
============================================================================
$ cvs diff -u -r0 -r1.1 amanda.disklist
--- /dev/null 2004-02-21 17:12:31.000000000 +0100
+++ amanda.disklist 2004-02-21 17:12:31.000000000 +0100
@@ -0,0 +1,17 @@
+# sample Amanda2 disklist file, derived from CS.UMD.EDU's disklist
+#
+# If your configuration is called, say, "DailySet1", then this file normally goes
+# in @l_prefix@/etc/amanda/DailySet1/disklist.
+#
+# File format is:
+#
+# hostname diskdev dumptype [spindle [interface]]
+#
+# where the dumptypes are defined by you in amanda.conf or in-line.
+
+# At our site, root partitions have a different dumptype because they
+# are of lower priority; they don't contain user data, and don't change
+# much from the department prototype. In a crunch, they can be left for
+# last or skipped.
+
+#my.fqdn.com @l_prefix@/etc comp-user-tar
@@ .
patch -p0 <<'@@ .'
Index: openpkg-src/amanda/amanda.spec
============================================================================
$ cvs diff -u -r0 -r1.1 amanda.spec
--- /dev/null 2004-02-21 17:12:31.000000000 +0100
+++ amanda.spec 2004-02-21 17:12:31.000000000 +0100
@@ -0,0 +1,216 @@
+##
+## amanda.spec -- OpenPKG RPM Specification
+## Copyright (c) 2000-2004 The OpenPKG Project <http://www.openpkg.org/>
+## Copyright (c) 2000-2004 Ralf S. Engelschall <[EMAIL PROTECTED]>
+## Copyright (c) 2000-2004 Cable & Wireless <http://www.cw.com/>
+##
+## Permission to use, copy, modify, and distribute this software for
+## any purpose with or without fee is hereby granted, provided that
+## the above copyright notice and this permission notice appear in all
+## copies.
+##
+## THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+## WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+## MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+## IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+## CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+## USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+## ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+## OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+## OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+## SUCH DAMAGE.
+##
+
+# package information
+Name: amanda
+Summary: The Advanced Maryland Automatic Network Disk Archiver
+URL: http://www.amanda.org/
+Vendor: University of Maryland at College Park
+Packager: The OpenPKG Project
+Distribution: OpenPKG
+Class: EVAL
+Group: System
+License: BSD-style
+Version: 2.4.4p2
+Release: 20040221
+
+# package options
+%option with_server yes
+%option with_port_range yes
+
+# list of sources
+Source0: http://osdn.dl.sourceforge.net/amanda/amanda-%{version}.tar.gz
+Source1: amanda.conf
+Source2: amanda.disklist
+Source3: xinetd.amanda
+Source4: xinetd.amandaidx
+Source5: xinetd.amidxtape
+
+# build information
+Prefix: %{l_prefix}
+BuildRoot: %{l_buildroot}
+BuildPreReq: OpenPKG, openpkg >= 20040130, tar, make
+PreReq: OpenPKG, openpkg >= 20040130, tar, xinetd
+AutoReq: no
+AutoReqProv: no
+
+%description
+ AMANDA, the Advanced Maryland Automatic Network Disk Archiver, is
+ a backup system that allows the administrator of a LAN to set up a
+ single master backup server to back up multiple hosts to a single
+ large capacity tape drive. AMANDA uses native dump and/or GNU tar
+ facilities and can back up a large number of workstations running
+ multiple versions of Unix.
+
+%track
+ prog amanda = {
+ version = %{version}
+ url = http://www.amanda.org/download.php
+ regex = amanda-(\d+\.[02468]\.\d+(p\d+)?)\.tar\.gz
+ }
+
+%prep
+ %setup -q
+
+ # patch /etc/amandates problem
+ %{l_shtool} subst -s \
+ -e 's;/etc/amandates;%{l_prefix}/etc/amanda/amandates;g' \
+ client-src/amandates.h
+
+%build
+ # configure package
+ CC="%{l_cc}" \
+ CFLAGS="%{l_cflags -O}" \
+ CPPFLAGS="%{l_cppflags}" \
+ LDFLAGS="%{l_ldflags} %{l_fsl_ldflags}" \
+ LIBS="%{l_fsl_libs}" \
+ ./configure \
+ --prefix=%{l_prefix} \
+ --sysconfdir=%{l_prefix}/etc/amanda \
+ --libexecdir=%{l_prefix}/libexec/amanda \
+ --libdir=%{l_prefix}/lib/amanda \
+ --localstatedir=%{l_prefix}/var/amanda \
+ --includedir=%{l_prefix}/include/amanda \
+ --disable-shared \
+ --with-user=%{l_musr} \
+ --with-group=%{l_mgrp} \
+ --with-configdir=%{l_prefix}/etc/amanda \
+ --with-gnutar=%{l_prefix}/bin/tar \
+ --with-gnutar-listdir=%{l_prefix}/var/amanda/gnutar-lists \
+%if "%{with_port_range}" == "yes"
+ --with-portrange=50000,50040 \
+ --with-udpportrange=890,899 \
+%endif
+%if "%{with_server}" == "yes"
+ --with-server
+%else
+ --without-server
+%endif
+
+ # build package
+ %{l_make} %{l_mflags -O}
+
+%install
+ rm -rf $RPM_BUILD_ROOT
+
+ # perform standard installation procedure
+ %{l_make} %{l_mflags} install \
+ DESTDIR=$RPM_BUILD_ROOT \
+ BINARY_OWNER="`%{l_shtool} echo -e %u`" \
+ SETUID_GROUP="`%{l_shtool} echo -e %u`"
+
+ # create additional directories
+ %{l_shtool} mkdir -f -p -m 755 \
+ $RPM_BUILD_ROOT%{l_prefix}/var/amanda/gnutar-lists \
+ $RPM_BUILD_ROOT%{l_prefix}/var/amanda/DailySet1 \
+ $RPM_BUILD_ROOT%{l_prefix}/etc/xinetd/xinetd.d
+
+ # create additional server-specific directories
+%if "%{with_server}" == "yes"
+ %{l_shtool} mkdir -f -p -m 755 \
+ $RPM_BUILD_ROOT%{l_prefix}/etc/amanda \
+ $RPM_BUILD_ROOT%{l_prefix}/etc/amanda/DailySet1 \
+ $RPM_BUILD_ROOT%{l_prefix}/var/amanda/dumps \
+ $RPM_BUILD_ROOT%{l_prefix}/var/amanda/DailySet1/curinfo \
+ $RPM_BUILD_ROOT%{l_prefix}/var/amanda/DailySet1/index
+%endif
+
+ # create empty files (FIXME: path of .amandahosts!!)
+ touch $RPM_BUILD_ROOT%{l_prefix}/.amandahosts
+ touch $RPM_BUILD_ROOT%{l_prefix}/etc/amanda/amandates
+ touch $RPM_BUILD_ROOT%{l_prefix}/lib/amanda/exclude.gtar
+
+ # install xinetd configuration files
+ %{l_shtool} install -c -m 644 \
+ -e 's;@USER@;%{l_musr};g' \
+ -e 's;@GROUP@;%{l_mgrp};g' \
+ -e 's;@LIBDIR@;%{l_prefix}/libexec/amanda;g' \
+ %{SOURCE xinetd.amanda} \
+ $RPM_BUILD_ROOT%{l_prefix}/etc/xinetd/xinetd.d/amanda
+%if "%{with_server}" == "yes"
+ %{l_shtool} install -c -m 644 \
+ -e 's;@USER@;%{l_musr};g' \
+ -e 's;@GROUP@;%{l_mgrp};g' \
+ -e 's;@LIBDIR@;%{l_prefix}/libexec/amanda;g' \
+ %{SOURCE xinetd.amandaidx} \
+ $RPM_BUILD_ROOT%{l_prefix}/etc/xinetd/xinetd.d/amandaidx
+ %{l_shtool} install -c -m 644 \
+ -e 's;@USER@;%{l_musr};g' \
+ -e 's;@GROUP@;%{l_mgrp};g' \
+ -e 's;@LIBDIR@;%{l_prefix}/libexec/amanda;g' \
+ %{SOURCE xinetd.amidxtape} \
+ $RPM_BUILD_ROOT%{l_prefix}/etc/xinetd/xinetd.d/amidxtape
+%endif
+
+%if "%{with_server}" == "yes"
+ # install example server configuration
+ %{l_shtool} install -c -m 644 \
+ -e 's;@PREFIX@;%{l_prefix};g' \
+ %{SOURCE amanda.conf} \
+ $RPM_BUILD_ROOT%{l_prefix}/etc/amanda/DailySet1/
+ %{l_shtool} install -c -m 644 %{l_value -s -a} \
+ %{SOURCE amanda.disklist} \
+ $RPM_BUILD_ROOT%{l_prefix}/etc/amanda/DailySet1/disklist
+%endif
+
+ # determine installation files
+ %{l_rpmtool} files -v -ofiles -r$RPM_BUILD_ROOT \
+ %{l_files_std} \
+ '%config %{l_prefix}/etc/amanda/DailySet1/*' \
+ '%not %dir %{l_prefix}/etc/xinetd/xinetd.d' \
+ '%config(noreplace) %{l_prefix}/etc/xinetd/xinetd.d/*' \
+ '%attr(660,%{l_musr},%{l_mgrp}) %config(noreplace)
%{l_prefix}/.amandahosts' \
+ '%attr(4711,%{l_susr},%{l_mgrp}) %{l_prefix}/sbin/amcheck' \
+ '%attr(4711,%{l_susr},%{l_mgrp}) %{l_prefix}/libexec/amanda/dumper' \
+ '%attr(4711,%{l_susr},%{l_mgrp}) %{l_prefix}/libexec/amanda/planner' \
+ '%attr(4711,%{l_susr},%{l_mgrp}) %{l_prefix}/libexec/amanda/runtar' \
+ '%attr(4711,%{l_susr},%{l_mgrp}) %{l_prefix}/libexec/amanda/rundump' \
+ '%attr(4711,%{l_susr},%{l_mgrp}) %{l_prefix}/libexec/amanda/calcsize' \
+ '%attr(4711,%{l_susr},%{l_mgrp}) %{l_prefix}/libexec/amanda/killpgrp'
+
+%files -f files
+
+%clean
+ rm -rf $RPM_BUILD_ROOT
+
+%post
+ if [ $1 = 1 ]; then
+ # add entries to /etc/services
+ ( echo "amanda 10080/udp # AMANDA"
+ echo "amandaidx 10082/tcp # AMANDA"
+ echo "amidxtape 10083/tcp # AMANDA"
+ ) | $RPM_INSTALL_PREFIX/lib/openpkg/rpmtool config \
+ -a -i "$RPM_INSTALL_PREFIX:amanda" /etc/services
+ fi
+ exit 0
+
+%preun
+ if [ $1 = 0 ]; then
+ # remove entries from /etc/services
+ $RPM_INSTALL_PREFIX/lib/openpkg/rpmtool config \
+ -r -i "$RPM_INSTALL_PREFIX:amanda" /etc/services
+ fi
+ exit 0
+
@@ .
patch -p0 <<'@@ .'
Index: openpkg-src/amanda/xinetd.amanda
============================================================================
$ cvs diff -u -r0 -r1.1 xinetd.amanda
--- /dev/null 2004-02-21 17:12:31.000000000 +0100
+++ xinetd.amanda 2004-02-21 17:12:31.000000000 +0100
@@ -0,0 +1,15 @@
+# default: off
+# description: The client for the Amanda backup system.\
+# This must be on for systems being backed up\
+# by Amanda.
+
+service amanda
+{
+ socket_type = dgram
+ protocol = udp
+ wait = yes
+ user = @USER@
+ group = @GROUP@
+ server = @LIBDIR@/amandad
+ disable = yes
+}
@@ .
patch -p0 <<'@@ .'
Index: openpkg-src/amanda/xinetd.amandaidx
============================================================================
$ cvs diff -u -r0 -r1.1 xinetd.amandaidx
--- /dev/null 2004-02-21 17:12:31.000000000 +0100
+++ xinetd.amandaidx 2004-02-21 17:12:31.000000000 +0100
@@ -0,0 +1,14 @@
+# default: off
+#
+# description: Part of the Amanda server package
+
+service amandaidx
+{
+ socket_type = stream
+ protocol = tcp
+ wait = no
+ user = @USER@
+ group = @GROUP@
+ server = @LIBDIR@/amindexd
+ disable = yes
+}
@@ .
patch -p0 <<'@@ .'
Index: openpkg-src/amanda/xinetd.amidxtape
============================================================================
$ cvs diff -u -r0 -r1.1 xinetd.amidxtape
--- /dev/null 2004-02-21 17:12:31.000000000 +0100
+++ xinetd.amidxtape 2004-02-21 17:12:31.000000000 +0100
@@ -0,0 +1,15 @@
+# default: off
+#
+# description: Part of the amanda server package
+#
+
+service amidxtape
+{
+ socket_type = stream
+ protocol = tcp
+ wait = no
+ user = @USER@
+ group = @GROUP@
+ server = @LIBDIR@/amidxtaped
+ disable = yes
+}
@@ .
______________________________________________________________________
The OpenPKG Project www.openpkg.org
CVS Repository Commit List [EMAIL PROTECTED]
