Hi João,
I have the same output for dmesg and it is enumerated through the command
"djtgcfg enum", giving the output:
$ djtgcfg enum
Found 1 device(s)
Device: Atlys
Product Name: Atlys
User Name: Atlys
Serial Number: 210178399691
I have the digilent utilities installed and I can upload the .bit file
using the djtgcfg command after issuing "djtgcfg init -d Atlys".
Can OpenOCD use the driver ?
Thank you very much,
Francisco Nunes.
On 30 July 2014 15:11, João Fernandes <[email protected]> wrote:
> Hello Francisco,
>
> Have you tried using the digilent cable drivers included in the Xilinx
> ISE? Check first if when you connect the Atlys through the usb cable to
> your computer it gets enumerated. You can check it through dmesg something
> like this should show up.
>
> [35217.761340] usb 2-2: New USB device found, idVendor=1443, idProduct=0007
> [35217.761343] usb 2-2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
>
> The Digilent cable drivers is installed
> at /etc/udev/rules.d/52-digilent-usb.rules . If you don't want to install
> Xilinx ISE you can also install Digilent adept plugins.
>
> Best Regards,
> João Fernandes
>
>
>
>
>
>
> On Wed, Jul 30, 2014 at 1:18 PM, Francisco Nunes <[email protected]>
> wrote:
>
>> Hello all,
>>
>> I'm trying to connect OpenOCD to this board using the digilent
>> programming port which is connected to a Cypress chip CY7C68013A. It seem
>> that this chip needs some firmware upload before it can be communicated
>> with. I found one project that claims it has succesfully programmed a
>> digilent nexys 1/2 board by compiling some firmware. I cannot compile due
>> to an error:
>>
>> $ make
>> sdas8051 -plosgff vectors.a51
>> sdcc -c -mmcs51 --no-xinit-opt -Ifx2 -Dhw_nexys usbjtag.c -o usbjtag.rel
>> fx2/fx2regs.h:73: syntax error: token -> 'at' ; column 9
>> make: *** [usbjtag.rel] Error 1
>>
>> The project is in: http://ixo-jtag.sourceforge.net/ .
>>
>> Thank you all,
>> Francisco Nunes.
>>
>> _______________________________________________
>> OpenRISC mailing list
>> [email protected]
>> http://lists.openrisc.net/listinfo/openrisc
>>
>>
>
_______________________________________________
OpenRISC mailing list
[email protected]
http://lists.openrisc.net/listinfo/openrisc
