Hi Minh,
Sorry for the delay, I was on vacation on 24-25 March.

Below is Results Summary of initial 50 test cases rerun and subsequent email 
will have results of remaining test cases, which I couldn't execute before 
because of these reported problems.

Summary of initial 50 test cases run
======================
Passed Test Case:       13 (#3, #4, #18, #22, #23, #24, #25, #26, #29, #30, 
#31, #41, #42)
Invalid Test cases:     32 (Because 'Comp failover' got converted into 'SU 
Failover' when headless for 'immediate escalation': #2, #12, #13, #14, #16, 
#17, #19, #20,
                                #21 and others because of documentations)
Failed Test cases:      5 (#9, #10, #15, #27, #28)
=====================

Failed Test Cases details below:
TC #9 and TC #10: Configuration is SC-1, PL-3 and PL-4. SU1(Act) on PL-3 and 
SU2(Std) on PL-4. 
                Stop controller and then stop PL-3, start PL-3 and start 
controller. SU2 will be Act and SU1 will be Standby.
                Stop controller and then stop PL-3, start PL-3 and start 
controller. Amfd sends reboot to all nodes including itself.
Two things:
        1. Why there were "SU data inconsistency detected", when there are two 
payloads.
        2. Since SG belonging to SU1 and SU2 are spread on PL-3 and PL-4, so 
why to reboot SC-1 ?

TC #15: Please find the configuration and syslogs and trace logs(V4 TC 15) in 
the ticket.
The SG went into unstable state and further admin operation fails:
osafamfd [2265:imm.cc:1998] >> report_admin_op_error: inv:60129542165, res:6, 
Error String: 'SG state is not stable'
SUSI states are inappropriate:
safSISU=safSu=SU2\,safSg=AmfDemo\,safApp=AmfDemo1,safSi=AmfDemo1,safApp=AmfDemo1
        saAmfSISUHAState=STANDBY(2)
        saAmfSISUHAReadinessState=READY_FOR_ASSIGNMENT(1)
safSISU=safSu=PL-3\,safSg=NoRed\,safApp=OpenSAF,safSi=NoRed3,safApp=OpenSAF
        saAmfSISUHAState=ACTIVE(1)
        saAmfSISUHAReadinessState=READY_FOR_ASSIGNMENT(1)
safSISU=safSu=SC-1\,safSg=2N\,safApp=OpenSAF,safSi=SC-2N,safApp=OpenSAF
        saAmfSISUHAState=ACTIVE(1)
        saAmfSISUHAReadinessState=READY_FOR_ASSIGNMENT(1)
safSISU=safSu=SC-1\,safSg=NoRed\,safApp=OpenSAF,safSi=NoRed1,safApp=OpenSAF
        saAmfSISUHAState=ACTIVE(1)
        saAmfSISUHAReadinessState=READY_FOR_ASSIGNMENT(1)
safSISU=safSu=PL-4\,safSg=NoRed\,safApp=OpenSAF,safSi=NoRed2,safApp=OpenSAF
        saAmfSISUHAState=ACTIVE(1)
        saAmfSISUHAReadinessState=READY_FOR_ASSIGNMENT(1)

TC #27: Please find the configuration and syslogs and trace logs(V4 TC 27) in 
the ticket.
TC #28: Please find the configuration and syslogs and trace logs(V4 TC 28) in 
the ticket.
        All Standby csi is removed and then again assigned fresh Csi. Ideally, 
csi shouldn't be removed.
Mar 17 17:13:30 PM_PL-4 osafamfnd[16899]: NO Removing 
'safSi=AmfDemo,safApp=AmfDemo1' from 'safSu=SU2,safSg=AmfDemo,safApp=AmfDemo1'
Mar 17 17:13:30 PM_PL-4 amf_demo[16976]: CSI Remove for all CSIs
Mar 17 17:13:30 PM_PL-4 osafamfnd[16899]: NO Removed 
'safSi=AmfDemo,safApp=AmfDemo1' from 'safSu=SU2,safSg=AmfDemo,safApp=AmfDemo1'
Mar 17 17:13:30 PM_PL-4 osafamfnd[16899]: NO Assigning 
'safSi=AmfDemo,safApp=AmfDemo1' STANDBY to 
'safSu=SU2,safSg=AmfDemo,safApp=AmfDemo1'
Mar 17 17:13:30 PM_PL-4 amf_demo[16976]: CSI Set - add 
'safCsi=AmfDemo,safSi=AmfDemo,safApp=AmfDemo1' HAState Standby
Mar 17 17:13:30 PM_PL-4 amf_demo[16976]:        name: abcdef, value: val1
Mar 17 17:13:30 PM_PL-4 amf_demo[16976]:        name: abcdef, value: val2
Mar 17 17:13:30 PM_PL-4 osafamfnd[16899]: NO Assigned 
'safSi=AmfDemo,safApp=AmfDemo1' STANDBY to 
'safSu=SU2,safSg=AmfDemo,safApp=AmfDemo1'


Thanks
-Nagu

> -----Original Message-----
> From: Nagendra Kumar
> Sent: 15 March 2016 14:26
> To: minh chau; hans.nordeb...@ericsson.com; gary....@dektech.com.au;
> Praveen Malviya
> Cc: opensaf-devel@lists.sourceforge.net
> Subject: Re: [devel] [PATCH 01 of 15] amfd: Add support for cloud resilience
> at common libs [#1620]
> 
> Hi Minh,
> 
>                 I am going to execute test cases with all the patches 
> applied. I will
> share the test results once I am done.
> 
> 
> 
> Can you please send all the patches (latest if any) in a tar file.
> 
> 
> 
> Please note that few of the test cases executed on previous patch sets would
> be invalid because of 'immediate esclation' implemented in the latest
> patches(#1-#4).
> 
> 
> 
> Thanks
> 
> -Nagu

------------------------------------------------------------------------------
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Library.
Click to learn more.
http://pubads.g.doubleclick.net/gampad/clk?id=278785471&iu=/4140
_______________________________________________
Opensaf-devel mailing list
Opensaf-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/opensaf-devel

Reply via email to