One thing to keep in mind is that TRY_AGAIN as return code must have
the meaning that the request was NOT executed. So the MDS error that will
result in a TRY_AGAIN towards the requestor, must be an error where the
MDS sending side KNOWS that the message did not reach the receiver.
It is not sufficent that the MDS sending side does NOT KNOW if the message
reached the receiver. In the latter case it is better to return ERR_TIMEOUT,
even if there was no timeout, because that is the only error code (I think)
that has the semantics "dont know what happened".
---
** [tickets:#641] MDS resend**
**Status:** unassigned
**Created:** Thu Nov 28, 2013 09:40 AM UTC by Hans Feldt
**Last Updated:** Thu Nov 28, 2013 01:52 PM UTC
**Owner:** nobody
Occasionally we see TIPC link congestion at the sending node. This can be seen
with "tipc-config -ls" as in:
Link <1.1.1:eth0-1.1.2:eth0>
ACTIVE MTU:1500 Priority:10 Tolerance:1500 ms Window:100 packets
RX packets:1877 fragments:0/0 bundles:0/0
TX packets:17511 fragments:0/0 bundles:0/0
TX profile sample:489 packets average:151 octets
0-64:0% -256:97% -1024:0% -4096:3% -16354:0% -32768:0% -66000:0%
RX states:12974 probes:5918 naks:0 defs:0 dups:0
TX states:12148 probes:6230 naks:0 acks:0 dups:0
Congestion bearer:0 link:12 Send queue max:81 avg:0
Above is from testing with tipc-pipe. With the default link window at 50 I get
one send EAGAIN when sending 100 msgs. When I increase link window to 100 I can
burst 100 msgs without link congestion. If I then burst 1000 msgs I see lots of
link congestion.
If we transfer this to opensaf it means a failed MDS send. MDS does not do any
resends, neither does any service (IMMs FEVS not considered)
AMFd for example could loose a message to a node director which is very bad.
What I suggest is that messages should be resent, typically a loop with 3
retries with a 100ms sleep in between.
There are some concerns, like:
* Can we put this in MDS or should it be done per service?
* What about MDS/TCP, same problem there?
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/opensaf/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/opensaf/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
_______________________________________________
Opensaf-tickets mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/opensaf-tickets
