Well thats why I changed it to doc.
I think the only problem was a missunderstanding, hence possibly a need to
clarify the documentation.
Either that or this ticket should be closed with 'worksforme'
/AndersBj
________________________________
From: Hans Feldt [mailto:[email protected]]
Sent: den 22 september 2014 17:47
To: [email protected]
Subject: [tickets] [opensaf:tickets] #1121 imm access control change at build
time didnot reflect in attribute change
Works for me, please try again!
uabhafe@xubuntu-13:~/opensaf-repos/opensaf-staging/osaf/services/saf/immsv/immloadd$
sudo /etc/init.d/opensafd restart
Stopping OpenSAF Services: *
Starting OpenSAF Services: *
uabhafe@xubuntu-13:~/opensaf-repos/opensaf-staging/osaf/services/saf/immsv/immloadd$
immfind | grep Imm
error - saImmOmInitialize FAILED: SA_AIS_ERR_ACCESS_DENIED (38)
uabhafe@xubuntu-13:~/opensaf-repos/opensaf-staging/osaf/services/saf/immsv/immloadd$
sudo immfind | grep Imm
opensafImm=opensafImm,safApp=safImmService
safApp=safImmService
safRdn=immManagement,safApp=safImmService
uabhafe@xubuntu-13:~/opensaf-repos/opensaf-staging/osaf/services/saf/immsv/immloadd$
sudo immlist opensafImm=opensafImm,safApp=safImmService
Name Type Value(s)
========================================================================
opensafImmSyncBatchSize SA_UINT32_T 58860 (0xe5ec)
opensafImmNostdFlags SA_UINT32_T <Empty>
opensafImmEpoch SA_UINT32_T 2 (0x2)
opensafImmClassNames SA_STRING_T OpensafImm OpenSafLogConfig
OpenSafSmfCampRestartIndicator OpenSafSmfCampRestartInfo OpenSafSmfConfig
OpenSafSmfMisc OpenSafSmfPbeIndicator OpenSafSmfRollbackData
OpenSafSmfRollbackElement OpenSafSmfSingleStepInfo OsafImmPbeRt
SaAmfAppBaseType SaAmfAppType SaAmfApplication SaAmfCSBaseType SaAmfCSI
SaAmfCSIAssignment SaAmfCSIAttribute SaAmfCSType SaAmfCluster SaAmfComp
SaAmfCompBaseType SaAmfCompCsType SaAmfCompGlobalAttributes SaAmfCompType
SaAmfCtCsType SaAmfHealthcheck SaAmfHealthcheckType SaAmfNode SaAmfNodeGroup
SaAmfNodeSwBundle SaAmfSG SaAmfSGBaseType SaAmfSGType SaAmfSI SaAmfSIAssignment
SaAmfSIDependency SaAmfSIRankedSU SaAmfSU SaAmfSUBaseType SaAmfSUType
SaAmfSutCompType SaAmfSvcBaseType SaAmfSvcType SaAmfSvcTypeCSTypes
SaCkptCheckpoint SaCkptReplica SaClmCluster SaClmNode SaImmMngt SaLogStream
SaLogStreamConfig SaSmfActivationUnit SaSmfCampaign SaSmfDeactivationUnit
SaSmfImageNodes SaSmfProcedure SaSmfStep SaSmfSwBundle
opensafImm SA_NAME_T opensafImm=opensafImm (21)
longDnsAllowed SA_UINT32_T 0 (0x0)
authorizedGroup SA_STRING_T <Empty>
accessControlMode SA_UINT32_T 2 (0x2)
SaImmAttrImplementerName SA_STRING_T <Empty>
SaImmAttrClassName SA_STRING_T OpensafImm
SaImmAttrAdminOwnerName SA_STRING_T IMMLOADER
uabhafe@xubuntu-13:~/opensaf-repos/opensaf-staging/osaf/services/saf/immsv/immloadd$
tail -1 ../../../../../config.h
define IMM_ACCESS_CONTROL_MODE 2
________________________________
[tickets:#1121]<http://sourceforge.net/p/opensaf/tickets/1121> imm access
control change at build time didnot reflect in attribute change
Status: unassigned
Milestone: 4.5.0
Created: Mon Sep 22, 2014 07:35 AM UTC by surender khetavath
Last Updated: Mon Sep 22, 2014 03:36 PM UTC
Owner: nobody
changeset : 5697
According to README.ACCESS_CONTROL:
"At build time the default access control mode can be changed (to ENFORCING)
after the configure step by adding to config.h:
define IMM_ACCESS_CONTROL_MODE 2"
Followed the README and added the above #def to config.h
After bringup of opensaf the change didnot reflect in the attribute.
immlist opensafImm=opensafImm,safApp=safImmService
opensafImm SA_NAME_T opensafImm=opensafImm (21)
longDnsAllowed SA_UINT32_T 0 (0x0)
authorizedGroup SA_STRING_T <Empty>
accessControlMode SA_UINT32_T 0 (0x0)
SaImmAttrImplementerName SA_STRING_T OpenSafImmPBE
SaImmAttrClassName SA_STRING_T OpensafImm
SaImmAttrAdminOwnerName SA_STRING_T IMMLOADER
________________________________
Sent from sourceforge.net because [email protected] is
subscribed to
https://sourceforge.net/p/opensaf/tickets/<https://sourceforge.net/p/opensaf/tickets>
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/opensaf/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
---
** [tickets:#1121] imm access control change at build time didnot reflect in
attribute change**
**Status:** unassigned
**Milestone:** 4.5.0
**Created:** Mon Sep 22, 2014 07:35 AM UTC by surender khetavath
**Last Updated:** Tue Sep 23, 2014 06:36 AM UTC
**Owner:** nobody
changeset : 5697
According to README.ACCESS_CONTROL:
"At build time the default access control mode can be changed (to ENFORCING)
after the configure step by adding to config.h:
#define IMM_ACCESS_CONTROL_MODE 2"
Followed the README and added the above #def to config.h
After bringup of opensaf the change didnot reflect in the attribute.
immlist opensafImm=opensafImm,safApp=safImmService
opensafImm SA_NAME_T
opensafImm=opensafImm (21)
longDnsAllowed SA_UINT32_T 0 (0x0)
authorizedGroup SA_STRING_T <Empty>
accessControlMode SA_UINT32_T 0 (0x0)
SaImmAttrImplementerName SA_STRING_T OpenSafImmPBE
SaImmAttrClassName SA_STRING_T OpensafImm
SaImmAttrAdminOwnerName SA_STRING_T IMMLOADER
---
Sent from sourceforge.net because [email protected] is
subscribed to http://sourceforge.net/p/opensaf/tickets/
To unsubscribe from further messages, a project admin can change settings at
http://sourceforge.net/p/opensaf/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Opensaf-tickets mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/opensaf-tickets
