Well, I tested that telnet as root user has no problem in running the script and opensaf gets started. I am not having TCL at my system, will see the possibilities of installing it.
Btw, can you send output of 'ps -ef |grep openhpi' when opensaf is not coming on Controller1(when using tcl script)? Thanks -Nagu > -----Original Message----- > From: Adnan Yasin [mailto:[email protected]] > Sent: 11 September 2014 18:17 > To: Nagendra Kumar; [email protected] > Cc: Ashok Kumar > Subject: RE: [users] SessionOpen failed with err:-1012 > > Hi Nagu, > > I tried your 2nd approach that is working fine. > But, as I mentioned earlier, on executing the set of commands directly on the > controller things are working fine i.e. opensaf is getting started properly > and > there are no error messages seen. > But what I am trying to do here is to start the opensaf and related services > from > a different machine via a TCL script, which still is not working. > Openhpi, plmc and plmc boot these three are coming up properly and PIDs of > these are also available. > > Regarding telnet: telnet (from script machine to Controller1) is done via root > user. > Starting the processes on the controller1: The commands to start openhpi, > plmc, > plmcboot and opensaf are also given in root user. > > I am looking for the difference in the behavior when the processes are > directly > started on the controllers and when they are being invoked via a TCL script > from > a different machine. > > If some further information is required on the same, do let me know. > > Thanks. > - > Adnan > > -----Original Message----- > From: Nagendra Kumar [mailto:[email protected]] > Sent: Thursday, September 11, 2014 1:08 AM > To: Adnan Yasin; [email protected] > Subject: RE: [users] SessionOpen failed with err:-1012 > > Hi Adnan, > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > This error indicate that openhpid is not started or there is some permission > issues during telnet. > But, you can debug this further. > > 1. Check whether openhpid gets started or not on controller1 (ps -e | grep > hpi) when these errors are coming. > > # ps -ef | grep hpi > root 15336 1 0 20:41 ? 00:00:00 /usr/sbin/openhpid -c > /etc/openhpi/openhpi.conf > > OR > 2. If it gets started, but still error are coming, then when these errors > starts > coming(PLM repeats 31 times after sleep of 2 seconds), execute > /etc/init.d/opensafd stop command and then /etc/init.d/opensafd start > command on Controller1 directly. The error should stop coming. > Then verify openhpid again by running ps -ef | grep hpi. > > > Thanks > -Nagu > > > > > I am trying to start the opensaf services via a TCL script as mention > below: > > > > > > > > send -i ${active_sid} "/etc/init.d/opensafd start\r" > > > > expect -i ${active_sid} -re {# $|#$} > > > > > > > > My scenario is : > > > > First of all I am executing a script on my Machine1, that script is > > doing a telnet to the Controller1 and then starting all the required > > services on > > Controller1 as given below: > > > > send -i ${active_sid} "/etc/init.d/openhpid start\r" > > > > expect -i ${active_sid} -re {# $|#$} > > > > send -i ${active_sid} "/etc/init.d/plmcboot start\r" > > > > expect -i ${active_sid} -re {# $|#$} > > > > send -i ${active_sid} "/etc/init.d/plmcd start\r" > > > > expect -i ${active_sid} -re {# $|#$} > > > > sleep 5 > > > > send -i ${active_sid} "/etc/init.d/opensafd start\r" > > > > expect -i ${active_sid} -re {# $|#$} > > > > > > > > After starting openhpid, plmcboot and plmcd when the opensaf is > > initiated, below error is noticed : > > > > > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER SessionOpen failed with > > err:-1012 after retrying31 times > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER plms_hsm_initialize > > failed > > > > Sep 10 12:44:41 controller1 osafplmd[4031]: ER Failed, exiting... > > > > Sep 10 12:44:41 controller1 opensafd[3893]: ER Failed > > > > > > > > > > > > One thing to note is that if I execute these above commands on > > Controller1 directly, it works fine and the opensaf gets started. > > > > > > > > Help is appreciated. > > > > > > > > > > > > Thanks. > > > > > > > > > > > > - > > > > Rgds, > > > > Adnan > > > > -- > > . > > ---------------------------------------------------------------------- > > -------- > > Want excitement? > > Manually upgrade your production database. > > When you want reliability, choose Perforce Perforce version control. > > Predictably reliable. > > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg. > > clk > > trk > > _______________________________________________ > > Opensaf-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/opensaf-users > > -- > . ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Opensaf-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/opensaf-users
