Hi, Yes, this would generally mean that there is a communication error between your payload and the controller. The payload is unable to see the controller.
You may enable the traces of IMMND on the payload and check the syslog, IMMNDtrace (and/or mds.log) for any evidence related to the communication error. (The syslog on the controller should also help understand if the controller is able to see the payload.) - Mathi. ----- [email protected] wrote: > So you mean immd on active controller somehow failed? > > > Sent from Samsung Mobile > > > -------- Original message -------- > From: Neelakanta Reddy > Date:2015/01/23 1:13 PM (GMT+08:00) > To: Yao Cheng LIANG ,[email protected] > Subject: Re: [users] immnd start failure > > Hi, > > Here rc=2 means FAILURE. > > The cause of the issue is active IMMD is not present in the cluster. > IMMND of payload/controllere tries to send to IMMD. > > check why active IMMD is not present in the cluster. > > /Neel. > > On Friday 23 January 2015 10:35 AM, Yao Cheng LIANG wrote: > So this a communication error? Or what may cause this issue? Whar rc=2 > means? > > Thanks. > > Ted > > > Sent from Samsung Mobile > > > -------- Original message -------- > From: Neelakanta Reddy > Date:2015/01/23 12:59 PM (GMT+08:00) > To: Yao Cheng LIANG > ,[email protected]<mailto:[email protected]> > Subject: Re: [users] immnd start failure > > Hi, > > IMMND always send to active IMMD controller. > > /Neel. > > On Friday 23 January 2015 10:27 AM, Yao Cheng LIANG wrote: > Here you mean immd on active controller or on local(standby) node? > > Thanks. > > Ted > > > Sent from Samsung Mobile > > > -------- Original message -------- > From: Neelakanta Reddy > Date:2015/01/23 12:33 PM (GMT+08:00) > To: > [email protected],Yao<mailto:[email protected],Yao> > Cheng LIANG > Subject: Re: [users] immnd start failure > > Hi, > > This is the case when IMMND tries to send to IMMD, But IMMD is not > available in the cluster. > Once the IMMD is available the message willnot appear. > > /Neel. > > On Friday 23 January 2015 06:49 AM, Yao Cheng LIANG wrote: > > BTW, it continues print these messages even after I reboot this node > and only after I reboot active controller it can be successfully > started. > > > > -----Original Message----- > > From: Yao Cheng LIANG [mailto:[email protected]] > > Sent: Friday, January 23, 2015 9:18 AM > > To: > [email protected]<mailto:[email protected]> > > Subject: [users] immnd start failure > > > > All, > > > > When I was starting OpenSAF controller, it prints errors below. > Could anyone tell me what caused this? Is "Rc:2" means root cause is > 2? > > > > Jan 22 13:04:30 localhost osafimmnd[2231]: MDS Send Failed to > service:IMMD rc:2 Jan 22 13:04:30 localhost osafimmnd[2231]: MDS Send > Failed to service:IMMD rc:2 Jan 22 13:04:30 localhost osafimmnd[2231]: > MDS Send Failed to service:IMMD rc:2 Jan 22 13:04:30 localhost > osafimmnd[2231]: MDS Send Failed to service:IMMD rc:2 > > > ------------------------------------------------------------------------------ > > New Year. New Location. New Benefits. New Data Center in Ashburn, > VA. > > GigeNET is offering a free month of service with a new server in > Ashburn. > > Choose from 2 high performing configs, both with 100TB of > bandwidth. > > Higher redundancy.Lower latency.Increased capacity.Completely > compliant. > > http://p.sf.net/sfu/gigenet > > _______________________________________________ > > Opensaf-users mailing list > > > [email protected]<mailto:[email protected]> > > https://lists.sourceforge.net/lists/listinfo/opensaf-users > > > > > ------------------------------------------------------------------------------ > > New Year. New Location. New Benefits. New Data Center in Ashburn, > VA. > > GigeNET is offering a free month of service with a new server in > Ashburn. > > Choose from 2 high performing configs, both with 100TB of > bandwidth. > > Higher redundancy.Lower latency.Increased capacity.Completely > compliant. > > http://p.sf.net/sfu/gigenet > > _______________________________________________ > > Opensaf-users mailing list > > > [email protected]<mailto:[email protected]> > > https://lists.sourceforge.net/lists/listinfo/opensaf-users > > > > ------------------------------------------------------------------------------ > New Year. New Location. New Benefits. New Data Center in Ashburn, VA. > GigeNET is offering a free month of service with a new server in > Ashburn. > Choose from 2 high performing configs, both with 100TB of bandwidth. > Higher redundancy.Lower latency.Increased capacity.Completely > compliant. > http://p.sf.net/sfu/gigenet > _______________________________________________ > Opensaf-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/opensaf-users ------------------------------------------------------------------------------ New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet _______________________________________________ Opensaf-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/opensaf-users
