Hi,
everyone who has problems with usb crypto tokens or usb smart card
readers not showing up if you plug them in: I found a bad bug in
the openct udev rules file (most lines missed a double quote at the
end of the line).
attached is a new file, I suggest to install it
as /etc/udev/rules.d/95-openct.rules
Please let me know if it fixes your problem or not.
Regards, Andreas
# udev rules file for openct
#
BUS!="usb", ACTION!="add", GOTO="openct_rules_end"
# egate
SYSFS{idVendor}=="0973", SYSFS{idProduct}=="0001",
RUN+="/etc/hotplug/usb/openct"
# eToken
SYSFS{idVendor}=="0529", SYSFS{idProduct}=="050c",
RUN+="/etc/hotplug/usb/openct"
SYSFS{idVendor}=="0529", SYSFS{idProduct}=="0514",
RUN+="/etc/hotplug/usb/openct"
# eToken 64
SYSFS{idVendor}=="0529", SYSFS{idProduct}=="0600",
RUN+="/etc/hotplug/usb/openct"
# eutron
SYSFS{idVendor}=="073d", SYSFS{idProduct}=="0005",
RUN+="/etc/hotplug/usb/openct"
# ikey2k
SYSFS{idVendor}=="04b9", SYSFS{idProduct}=="1200",
RUN+="/etc/hotplug/usb/openct"
# ikey3k
SYSFS{idVendor}=="04b9", SYSFS{idProduct}=="1300",
RUN+="/etc/hotplug/usb/openct"
# starkey
SYSFS{idVendor}=="096e", SYSFS{idProduct}=="0005",
RUN+="/etc/hotplug/usb/openct"
# cardman
#SYSFS{idVendor}=="076b", SYSFS{idProduct}=="0596",
RUN+="/etc/hotplug/usb/openct"
#SYSFS{idVendor}=="076b", SYSFS{idProduct}=="1784",
RUN+="/etc/hotplug/usb/openct"
#SYSFS{idVendor}=="08d4", SYSFS{idProduct}=="0009",
RUN+="/etc/hotplug/usb/openct"
# ccid
SYSFS{bDeviceClass}=="0b", SYSFS{bInterfaceSubClass}=="00",
SYSFS{bInterfaceProtocol}=="00" RUN+="/etc/hotplug/usb/openct"
# spr 532 - ccid, but with wrong interface class (vendor) :(
SYSFS{idVendor}=="04e6", SYSFS{idProduct}=="0003",
RUN+="/etc/hotplug/usb/openct"
# pertosmart1030
SYSFS{idVendor}=="072f", SYSFS{idProduct}=="0001",
RUN+="/etc/hotplug/usb/openct"
SYSFS{idVendor}=="072f", SYSFS{idProduct}=="8009",
RUN+="/etc/hotplug/usb/openct"
# pertosmart1038
SYSFS{idVendor}=="072f", SYSFS{idProduct}=="9000",
RUN+="/etc/hotplug/usb/openct"
SYSFS{idVendor}=="072f", SYSFS{idProduct}=="90d0",
RUN+="/etc/hotplug/usb/openct"
LABEL="openct_rules_end"
_______________________________________________
opensc-devel mailing list
[email protected]
http://www.opensc-project.org/mailman/listinfo/opensc-devel
