2011/3/30 jons...@terra.es <jons...@terra.es>: > > In my case Spanish C3PO's LTC31 (reported name 'C3PO LTC31 00 00' ) claims > > for > > having pinpad support but I'cannot see any pinpad :-) > > Can you send me the output.txt file for this reader as documented at [1]? > I have two LTC31 [2, 3] in my list but none of them claim to be a pinpad.
Mmmmh... perhaps you're right: Some time ago I had some problems with pinpad flag when testing DNIe and had to disable it card-dnie.c::dnie_init(). So time to revise. Anyway, I send you an attachment with my report.txt The reader is a LTC31v2 with updated firmware Juan Antonio
idVendor: 0x0783 iManufacturer: C3PO idProduct: 0x0006 iProduct: USB SMART CARD READER bcdDevice: 0.50 (firmware release?) bLength: 9 bDescriptorType: 4 bInterfaceNumber: 0 bAlternateSetting: 0 bNumEndpoints: 3 bulk-IN, bulk-OUT and Interrupt-IN bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)] bInterfaceSubClass: 0 bInterfaceProtocol: 0 bulk transfer, optional interrupt-IN (CCID) iInterface: ? CCID Class Descriptor bLength: 0x36 bDescriptorType: 0x21 bcdCCID: 1.00 bMaxSlotIndex: 0x00 bVoltageSupport: 0x01 5.0V dwProtocols: 0x0000 0x0003 T=0 T=1 dwDefaultClock: 4.000 MHz dwMaximumClock: 8.000 MHz bNumClockSupported: 0 (will use whatever is returned) IFD does not support GET CLOCK FREQUENCIES request: Success dwDataRate: 9600 bps dwMaxDataRate: 230400 bps bNumDataRatesSupported: 0 (will use whatever is returned) IFD does not support GET_DATA_RATES request: Success dwMaxIFSD: 254 dwSynchProtocols: 0x00000007 2-wire protocol 3-wire protocol I2C protocol dwMechanical: 0x00000000 No special characteristics dwFeatures: 0x000100BA ....02 Automatic parameter configuration based on ATR data ....08 Automatic ICC voltage selection ....10 Automatic ICC clock frequency change according to parameters ....20 Automatic baud rate change according to frequency and Fi, Di params ....80 Automatic PPS made by the CCID 01.... TPDU level exchange dwMaxCCIDMessageLength: 271 bytes bClassGetResponse: 0x00 bClassEnveloppe: 0x00 wLcdLayout: 0x0000 bPINSupport: 0x00 bMaxCCIDBusySlots: 1
_______________________________________________ opensc-devel mailing list opensc-devel@lists.opensc-project.org http://www.opensc-project.org/mailman/listinfo/opensc-devel
