On 5/4/2011 3:59 AM, BLANC Gilles wrote: > Le samedi 30 avril 2011 19:26:19, Viktor TARASOV a écrit : >> Hello Gilles, >> >> Le 29/04/2011 19:11, BLANC Gilles a écrit : >>> I have seen that you have modified some things. Sadly, I still encounter >>> the same problem by now... >> >> When stating some problems, good practice is to join the logs. >> >> It's extremely simple: in opensc.conf, in 'app default' section, set 'debug >> = 8;' and comment out the line starting as 'debug_file = ...'. > > Hello, > > It seems not to be so easy to send simple verbose logs on this ML: my message > is moderated since monday... :/ > > "The reason it is being held: > Message body is too big: 1146293 bytes with a limit of 50 KB" > > (well... 1.1mb, oups, but it is really a simple execution !) > > In a nutshell, I have succeded to make it work (at least delete, I'm testing > the other functionalities today), but it crashes sometimes... > > > Here is my original email : > > """ > > Actually I had problem with log activation: I have finally found that it was > not using /etc/opensc.conf but /usr/local/etc/opensc.conf... > > When I watched to the logs, I found that the profile files were not correctly > installed. So I copied them in the system, and... tadam ! Delete works ! :) > > Well... except when it bugs. :/
If you install was not clean, do you have two version of of OpenSC on your machine? (One you built in /usr/local and one as part of the system? Are you sure a program is using the correct shared libs? ldd can be used to see what will be loaded. > > Sometimes it refuses to delete an object, and even sometimes it crashes ! I > join you the log corresponding to one refusal and one crash. Maybe it is a > mishandling, but I do not think so, since I have cleaned then loaded all > certificates and key pair with the Oberthur official sw on Windows... > > """ > > I join you the last 50kb logs. > > Thanks, > > > > _______________________________________________ > opensc-devel mailing list > opensc-devel@lists.opensc-project.org > http://www.opensc-project.org/mailman/listinfo/opensc-devel -- Douglas E. Engert <deeng...@anl.gov> Argonne National Laboratory 9700 South Cass Avenue Argonne, Illinois 60439 (630) 252-5444 _______________________________________________ opensc-devel mailing list opensc-devel@lists.opensc-project.org http://www.opensc-project.org/mailman/listinfo/opensc-devel
