Il 16/01/2012 07:29, Scott Thomas ha scritto: > I am using Cryptoflex e-gate v4 32k card which contains 8 slots for > certificates. I have tried slot0-id_45 to slot7-id_45. > On slot 0 it works fine but from slot 1-7 it gives error of empty slot > which means that other 7 slots will must work fine > but if i try slot 8-onwards, it gives error of invalid slot number by > which it can be assumed that it does not work with 2 cards in this way. Nope. IIUC, "slot" means "PIN" (or "authentication method"). You "log in" to a slot and then can use all the keys in that slot. So your card could easily have just one slot, containing up to 8 keys and certs. IIRC Aventra MyEID cards can handle 14(15?) different PINS (plus SO-PIN), so they could need 15 (or 16?) slots to be fully used. In pcscd.conf you can define how many slots are available for each reader and system-wide. IIRC by default you should have 4 slots for each reader and up to 4 readers. So, in your case, to use the key w/ ID 45 on the second card you should use slot5-id_45... unless having keys with the same ID confuses the system, even if they're in different slots.
Try: $ pkcs11-tool --module /usr/lib/opensc-pkcs11.so -L -T BYtE, Diego. _______________________________________________ opensc-devel mailing list opensc-devel@lists.opensc-project.org http://www.opensc-project.org/mailman/listinfo/opensc-devel
