Hi Vincent,
I fixed the bug if you don't want to wait for cvs I attached the fixed
cpp file. Just copy it in OpenSG/System/State and recompile.
Andreas
Hello,
My goal was also to represent the clipping plane. I did like that:
ClipPlaneChunkPtr clipPlaneChunk = ClipPlaneChunk::create();
NodePtr surfaceClippingPlaneNode = Node::create();
NodePtr swischenNode = Node::create();
NodePtr swischenNodeRot = Node::create();
TransformPtr ClipPlaneTr = Transform::create();
beginEditCP(surfaceClippingPlaneNode);
{
surfaceClippingPlaneNode->setCore(ClipPlaneTr);
surfaceClippingPlaneNode->addChild(swischenNode);
}
endEditCP(surfaceClippingPlaneNode);
GeometryPtr clipPlaneGeo = makePlaneGeo( 100, 100, 1, 1);
beginEditCP(swischenNode, Node::CoreFieldMask);
{
swischenNode->setCore(clipPlaneGeo);
}
endEditCP(swischenNode, Node::CoreFieldMask);
beginEditCP(clipPlaneChunk);
clipPlaneChunk->setEnable(true);
clipPlaneChunk->setBeacon(surfaceClippingPlaneNode);
endEditCP(clipPlaneChunk);
and I give the surfaceClippingPlaneNode to the root node. If I add this
node to the root node it does not work any more. Is it normal ?
I think the solution of my problem is simple, but I would like to know
if the problem I had is normal.
Thanks a lot.
Vincent
Vincent Honnet wrote:
Hello Dirk,
As I wrote the test program I saw that it's working well. So I did a
mistake in my code. I'm looking for it.
Thanks.
Vincent
Dirk Reiners wrote:
Hi Vincent,
On Mon, 2005-04-11 at 15:52 +0200, Vincent Honnet wrote:
Hello,
I have a problem with the ClippingPlaneChunk. Here is an exemple of
my SG:
Root
-> Node1
-> Node2
-> Node3
Quite simple...
I would like to clip each object with its own plane. I gave to the
material of Node1 a ClipPlaneChunkPtr, another one to the Material
of Node2, and so on. If I enable the ClipPlaneChunkPtr of Node1,
Node1 Node2 and Node3 are clipped but not only Node1. If the
ClipPlaneChunkPtr of Node2 is enabled and the other disabled, then
Node2 and 3 are clipped. If the ClipPlaneChunkPtr of Node1 and 2 are
enabled, the clipping plane of Node2 is not taken into account and
Node1 and 2 are clipped with the ClipPlaneChunkPtr of Node1.
Is it possible to clip only one object with a ClipPlaneChunkPtr ?
Yup, that should just work the way you're doing it. I looked at the
ClipPlaneChunk code, but couldn't see anything that would give your
effect.
Could you make an example similar to a tutorial that I could try?
Thanks
Dirk
--
Andreas Zieringer [EMAIL PROTECTED]
Fraunhofer IGD - A4 phone +49 (0)6151 155 289
Fraunhoferstr. 5 fax +49 (0)6151 155 196
D-64283 Darmstadt www.igd.fhg.de/www/igd-a4
/*---------------------------------------------------------------------------*\
* OpenSG *
* *
* *
* Copyright (C) 2000-2002 by the OpenSG Forum *
* *
* www.opensg.org *
* *
* contact: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] *
* *
\*---------------------------------------------------------------------------*/
/*---------------------------------------------------------------------------*\
* License *
* *
* This library is free software; you can redistribute it and/or modify it *
* under the terms of the GNU Library General Public License as published *
* by the Free Software Foundation, version 2. *
* *
* This library is distributed in the hope that it will be useful, but *
* WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *
* Library General Public License for more details. *
* *
* You should have received a copy of the GNU Library General Public *
* License along with this library; if not, write to the Free Software *
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
* *
\*---------------------------------------------------------------------------*/
/*---------------------------------------------------------------------------*\
* Changes *
* *
* *
* *
* *
* *
* *
\*---------------------------------------------------------------------------*/
//---------------------------------------------------------------------------
// Includes
//---------------------------------------------------------------------------
#include <stdlib.h>
#include <stdio.h>
#include <OSGConfig.h>
#include <OSGGL.h>
#include <OSGDrawActionBase.h>
#include <OSGRenderAction.h>
#include <OSGCamera.h>
#include "OSGClipPlaneChunk.h"
OSG_USING_NAMESPACE
/***************************************************************************\
* Description *
\***************************************************************************/
/*! \class osg::ClipPlaneChunk
\ingroup GrpSystemState
See \ref PageSystemClipPlaneChunk for a description.
This chunk wraps glCLipPlane() (osg::ClipPlaneChunk::_sfEquation) and
glEnable(GL_CLIP_PLANEi) (osg::ClipPlaneChunk::_sfEnable). The coordinate
system the plane is in is defined by osg::ClipPlaneChunk::_sfBeacon.
*/
/***************************************************************************\
* Class variables *
\***************************************************************************/
StateChunkClass ClipPlaneChunk::_class("ClipPlane", 6);
/***************************************************************************\
* Instance methods *
\***************************************************************************/
/*-------------------------------------------------------------------------*\
- private -
\*-------------------------------------------------------------------------*/
/*----------------------- constructors & destructors ----------------------*/
ClipPlaneChunk::ClipPlaneChunk(void) :
Inherited()
{
}
ClipPlaneChunk::ClipPlaneChunk(const ClipPlaneChunk &source) :
Inherited(source)
{
}
ClipPlaneChunk::~ClipPlaneChunk(void)
{
}
/*----------------------- Chunk Class Access -----------------------------*/
const StateChunkClass *ClipPlaneChunk::getClass(void) const
{
return &_class;
}
/*------------------------------- Sync -----------------------------------*/
void ClipPlaneChunk::changed(BitVector, UInt32)
{
}
/*------------------------------ Output ----------------------------------*/
void ClipPlaneChunk::dump( UInt32 ,
const BitVector) const
{
SLOG << "Dump ClipPlaneChunk NI" << std::endl;
}
/*------------------------------ State ------------------------------------*/
void ClipPlaneChunk::activate(DrawActionBase *action, UInt32 idx)
{
RenderAction *ra = dynamic_cast<RenderAction *>(action);
Matrix beaconMat;
if(ra != NULL)
{
beaconMat = ra->top_matrix();
}
else
{
beaconMat = action->getActNode()->getToWorld();
}
Matrix cameraMat = action->getCameraToWorld();
cameraMat.invert();
if(getBeacon() != NullFC)
{
getBeacon()->getToWorld(beaconMat);
}
else
{
SWARNING << "NO beacon" << std::endl;
}
cameraMat.mult(beaconMat);
if(getEnable())
{
GLdouble glEq[4];
Vec4f & eq = getEquation();
glEq[0] = eq[0];
glEq[1] = eq[1];
glEq[2] = eq[2];
glEq[3] = eq[3];
glPushMatrix();
glLoadMatrixf(cameraMat.getValues());
glClipPlane( GL_CLIP_PLANE0 + idx, glEq);
glEnable( GL_CLIP_PLANE0 + idx);
glPopMatrix();
}
}
void ClipPlaneChunk::changeFrom(DrawActionBase *action, StateChunk * old_chunk,
UInt32 idx)
{
ClipPlaneChunk const *old = dynamic_cast<ClipPlaneChunk const*>(old_chunk);
// change from me to me?
// this assumes I haven't changed in the meantime. is that a valid
assumption?
if(old == this)
return;
RenderAction *ra = dynamic_cast<RenderAction *>(action);
Matrix beaconMat;
if(ra != NULL)
{
beaconMat = ra->top_matrix();
}
else
{
beaconMat = action->getActNode()->getToWorld();
}
Matrix cameraMat = action->getCameraToWorld();
cameraMat.invert();
if (getBeacon() != NullFC)
{
getBeacon()->getToWorld(beaconMat);
}
else
{
SWARNING << "ClipPlaneChunk::changeFrom: NO beacon" << std::endl;
}
cameraMat.mult(beaconMat);
if(getEnable() != old->getEnable() ||
getBeacon() != old->getBeacon())
{
if(getEnable())
{
GLdouble glEq[4];
Vec4f & eq = getEquation();
glEq[0] = eq[0];
glEq[1] = eq[1];
glEq[2] = eq[2];
glEq[3] = eq[3];
glPushMatrix();
glLoadMatrixf(cameraMat.getValues());
glClipPlane( GL_CLIP_PLANE0 + idx, glEq);
glEnable( GL_CLIP_PLANE0 + idx);
glPopMatrix();
}
else
{
glDisable( GL_CLIP_PLANE0 + idx);
}
}
else
{
;//SWARNING << " - are the SAME" << std::endl;
}
}
void ClipPlaneChunk::deactivate(DrawActionBase *, UInt32 idx)
{
if(getEnable())
{
glDisable( GL_CLIP_PLANE0 + idx);
}
}
/*-------------------------- Comparison -----------------------------------*/
Real32 ClipPlaneChunk::switchCost(StateChunk *OSG_CHECK_ARG(chunk))
{
return 0;
}
bool ClipPlaneChunk::operator < (const StateChunk &other) const
{
return this < &other;
}
bool ClipPlaneChunk::operator == (const StateChunk &other) const
{
ClipPlaneChunk const *tother = dynamic_cast<ClipPlaneChunk const*>(&other);
if(!tother)
return false;
if(getEnable() != tother->getEnable())
return false;
if(getEquation() != tother->getEquation())
return false;
if(getBeacon() != tother->getBeacon())
return false;
return true;
}
bool ClipPlaneChunk::operator != (const StateChunk &other) const
{
return ! (*this == other);
}
/*------------------------------------------------------------------------*/
/* cvs id's */
#ifdef OSG_SGI_CC
#pragma set woff 1174
#endif
#ifdef OSG_LINUX_ICC
#pragma warning( disable : 177)
#endif
namespace
{
static Char8 cvsid_cpp [] = "@(#)$Id: FCTemplate_cpp.h,v 1.13
2002/06/01 10:37:25 vossg Exp $";
static Char8 cvsid_hpp [] = OSGCLIPPLANECHUNK_HEADER_CVSID;
static Char8 cvsid_inl [] = OSGCLIPPLANECHUNK_INLINE_CVSID;
static Char8 cvsid_fields_hpp[] = OSGCLIPPLANECHUNKFIELDS_HEADER_CVSID;
}
#ifdef __sgi
#pragma reset woff 1174
#endif
