On the work unix machine, there are no blocked ports. On the home pc machine, the usual incoming ports are open (9000 through 9010, 8000 through 8010) and both work and home opensims can be accessed via the SL viewer using the FQDN fine when not using the HG architecture (i.e., when using regular standalone). Is there a particular port or port range that HG uses, not used in standalone? Perhaps I have not opened up everything I need to for HG. -p
[email protected] wrote: > Ports blocked on firewall. > > Paul Fishwick wrote: >> [email protected] wrote: >>> Paul Fishwick wrote: >>> >>>> It has public access ("Allow Public Access" is set in >>>> Region/Estate). However, it also has the >>>> defaultpermissionsmodule, so does one need to disable permissions >>>> (username, password) to >>>> get hypergrid TPs to work? >>>> >>> >>> No. I though you were saying you have an access list in that sim. >>> Permissions work exactly the same way in HG and non-HG. >>> >>> I don't know in which way you are failing to TP. It may be that you >>> don't have your home region set. You cannot HG TP around without a >>> home region. For setting a home region, you need to set it, logout, >>> and then login again, or the viewer's cache will get in the way. >>> >> I went back temporarily to the regular standalone architecture for >> the two opensim installations - we'll call them HOME and WORK. I >> verified in each that >> a home was set, since I could do "Teleport Home" in each, an it >> worked fine. I also, >> in each, set "accounts_authenticate = false" since this would appear >> to be necessary for >> HG? In any case, I can login as anyone and yet the permissions module >> is enabled so only >> the master user can edit/create on the land. So far, so good. >> >> Now, that I know that accounts_authenticate is turned off and that >> each opensim >> has a home region set, I turned back on the hypergrid setting under >> [Architecture] for both >> HOME and WORK. >> >> At HOME, I did link-region 1000 1000 <WORK IP> 9000 local >> >> this fails to get the map image, but correctly links in the WORK >> opensim at 1000, 1000. >> I can see the grey square at the 1000,1000 location in the map. >> With the hypergrid, back on, I am unable to "Teleport Home" let alone >> teleport to 'local' >> by clicking on the grey square and trying to teleport there. When I >> try "Teleport Home", it >> is attempting to teleport to WORK's home since I can see this in >> WORK's opensim log, when >> it should be trying to teleport to HOME's home. >> >> In any event, I get [Hgrid]: Access denied to foreign user on the >> WORK log screen. >> >> I realize I must be missing another essential step or setting. Thoughts? >> >> -p >> >> >> >> >>> _______________________________________________ >>> Opensim-users mailing list >>> [email protected] >>> https://lists.berlios.de/mailman/listinfo/opensim-users >>> >>> >> >> > -- Paul Fishwick, PhD Professor University of Florida CISE Department, CSE 301 Gainesville, FL 32611 Email: [email protected] Web: http://www.cise.ufl.edu/~fishwick _______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
