Ok, I am submitting this to see what you all think, because I am
trying to run it in Grid Mode, with HyperGrid so that I can log
other regions into it. Its on Linux and all ports are open. We
have tested stand alone and it works fine. but now we are trying
to solve this when we started over from scratch on how to get the
UserServer to be seen by the MessagingServer.
THE ERROR
----------------------------------------------
20:18:12 - [SERVER]: Unable to connect to server http://173.212.195.224:8002/
for registration. User service not running? Exception Error:
ConnectFailure at System.Net.HttpWebRequest.EndGetRequestStream
(IAsyncResult asyncResult) [0x00000]
at System.Net.HttpWebRequest.GetRequestStream () [0x00000]
at Nwc.XmlRpc.XmlRpcRequest.Send (System.String url, Int32
timeout) [0x00000]
at Nwc.XmlRpc.XmlRpcRequest.Invoke (System.String url) [0x00000]
at
OpenSim
.Grid
.MessagingServer
.Modules.InterMessageUserServerModule.registerWithUserServer ()
[0x00000]
----------------------------------------------
OpenSim.ini file port settings
----------------------------------------------
[Network]
ConsoleUser = "Test"
ConsolePass = "secret"
http_listener_port = 9000
default_location_x = 1000
default_location_y = 1000
; ssl config: Experimental! The auto https config only really
works definately on windows XP now
; you need a Cert Request/Signed pair installed in the MY
store with the CN specified below
; you can use https on other platforms, but you'll need to
configure the httpapi yourself for now
http_listener_ssl = false ; Also create a SSL server
http_listener_cn = "localhost" ; Use the cert with the common
name
http_listener_sslport = 9001 ; Use this port for SSL connections
http_listener_ssl_cert = "" ; Currently unused, but will be
used for OSHttpServer
; Hostname to use in llRequestURL/llRequestSecureURL
; if not defined - default machine name is being used
; (on Windows this mean NETBIOS name - useably only inside
local network)
; ExternalHostNameForLSL=127.0.0.1
; Uncomment below to enable llRemoteData/remote channels
; remoteDataPort = 20800
grid_server_url = "http://173.212.195.224:8003";
grid_send_key = "1234"
grid_recv_key = "1234"
user_server_url = "http://173.212.195.224:8002";
user_send_key = "1234"
user_recv_key = "1234"
asset_server_url = "http://173.212.195.224:8003";
inventory_server_url = "http://173.212.195.224:8003";
; The MessagingServer is a companion of the UserServer. It uses
; user_send_key and user_recv_key, too
messaging_server_url = "http://173.212.195.224:8006";
; What is reported as the "X-Secondlife-Shard"
; Defaults to the user server url if not set
; The old default is "OpenSim", set here fro compatibility
shard = "OpenSim"
------------------------------------------------------
OpenSim.Server.ini settings
------------------------------------------------------
; * The startup section lists all the connectors to start up in
this server
; * instance. This may be only one, or it may be the entire server
suite.
; * Multiple connectors should be seaprated by commas.
; *
; * These are the IN connectors the server uses, the in connectors
; * read this config file and load the needed OUT and database
connectors
; *
; * Add
"OpenSim.Server.Handlers.dll:AuthenticationServiceConnector" to
; * enable the experimental authentication service
; *
[Startup]
ServiceConnectors =
"OpenSim
.Server
.Handlers
.dll:AssetServiceConnector
,OpenSim
.Server
.Handlers
.dll:InventoryServiceInConnector
,OpenSim
.Server
.Handlers
.dll:FreeswitchServerConnector
,OpenSim.Server.Handlers.dll:GridServiceConnector"
; * This is common for all services, it's the network setup for
the entire
; * server instance
; *
[Network]
port = 8003
; * The following are for the remote console
; * They have no effect for the local or basic console types
; * Leave commented to diable logins to the console
;ConsoleUser = Test
;ConsolePass = secret
; * As an example, the below configuration precisely mimicks the
legacy
; * asset server. It is read by the asset IN connector (defined
above)
; * and it then loads the OUT connector (a local database module).
That,
; * in turn, reads the asset loader and database connection
information
; *
[AssetService]
LocalServiceModule =
"OpenSim.Services.AssetService.dll:AssetService"
DefaultAssetLoader = "OpenSim.Framework.AssetLoader.Filesystem.dll"
AssetLoaderArgs = "assets/AssetSets.xml"
StorageProvider = "OpenSim.Data.MySQL.dll"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
; * This configuration loads the inventory server modules. It
duplicates
; * the function of the legacy inventory server
; *
[InventoryService]
LocalServiceModule =
"OpenSim.Services.InventoryService.dll:InventoryService"
UserServerURI = "http://173.212.195.224:8002";
SessionAuthentication = "true"
StorageProvider = "OpenSim.Data.MySQL.dll"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
; * This is the configuration for the freeswitch server in grid mode
[FreeswitchService]
LocalServiceModule =
"OpenSim.Services.FreeswitchService.dll:FreeswitchService"
; * This is the new style authentication service. Currently, only
MySQL
; * is implemented. "Realm" is the table that is used for user
lookup.
; * By setting it to "users", you can use the old style users table
; * as an authentication source.
; *
[AuthenticationService]
AuthenticationServiceModule =
"OpenSim
.Services.AuthenticationService.dll:PasswordAuthenticationService"
StorageProvider = "OpenSim.Data.MySQL.dll"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
; Realm = "users"
; * This is the new style user service.
; * "Realm" is the table that is used for user lookup.
; * It defaults to "users", which uses the legacy tables
; *
[UserAccountService]
AuthenticationServiceModule =
"OpenSim.Services.UserService.dll:UserAccountService"
StorageProvider = "OpenSim.Data.MySQL.dll"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
; Realm = "users"
; * This is the new style grid service.
; * "Realm" is the table that is used for user lookup.
; * It defaults to "regions", which uses the legacy tables
; *
[GridService]
LocalServiceModule = "OpenSim.Services.GridService.dll:GridService"
StorageProvider = "OpenSim.Data.MySQL.dll:MySqlRegionData"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
Realm = "regions"
----------------------------------------------------
GridCommon.ini settings
--------------------------------------------------
[AssetService]
DefaultAssetLoader =
"OpenSim.Framework.AssetLoader.Filesystem.dll"
AssetLoaderArgs = "assets/AssetSets.xml"
;
; change this to your grid-wide asset server
;
AssetServerURI = "http://173.212.195.224:8003";
[InventoryService]
;
; change this to your grid-wide inventory server
;
InventoryServerURI = "http://173.212.195.224:8003";
[GridService]
;
; change this to your grid-wide grid server
;
GridServerURI = "http://173.212.195.224:8003";
[Modules]
;; Choose 0 or 1 cache modules, and the corresponding config
file, if it exists.
;; Copy the config .example file into your own .ini file and
change configs there
AssetCaching = "FlotsamAssetCache"
Include-FlotsamCache = "config-include/FlotsamCache.ini"
;AssetCaching = "CenomeMemoryAssetCache"
;Include-CenomeCache = "config-include/CenomeCache.ini"
;AssetCaching = "GlynnTuckerAssetCache"
;; Optionally, the port for the LLProxyLoginModule module can
be changed
;Setup_LLProxyLoginModule = "9090/"
------------------------------------------------------------------------
I have set this up according to the OpenSimulator Grid tutorials.
but they are not finished it seems. Any ideas ?
Sonya
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
