have you checked the xmlrpc port I'm not sure if its needed but I ran into the same problem
I found a control in my lan that forwarded all the ports and it solved the problem but the one I didn't try was XMLRPC which is 20800 that port is mentioned in 7.0.2 but not in 7.1.1 but I would expect the same port you can look in your router and see if it has a control to place the entire ip to the internet it will only do this for 1 ip in the lan hope this helps Gary From: [email protected] [mailto:[email protected]] On Behalf Of Guardian Sent: Sunday, August 14, 2011 8:05 PM To: [email protected] Subject: Re: [Opensim-users] Awaiting region handshake I just tried changing the port to 9001 and forwarding that but still no go. On Aug 15, 2011 7:37 AM, "Guardian" <[email protected]> wrote: > Hi Guys, > > Thanks for the suggestions, I've checked the ports and they seem fine, both > 8002TCP and 9000TCP/UDP are open. > > > > > On Mon, Aug 15, 2011 at 1:02 AM, Karen Palen <[email protected]> wrote: > >> I have always found that the free "Shields Up" at WWW.grc.com is a >> "quick and dirty way" to verify that the ports are actually open and >> working. >> >> I also found that my TOR relay setup uses 9000 series ports and can >> interfere with extenal connections. >> >> There are a lot of links in that chain that can block the traffic! >> >> Karen >> >> On 08/14/2011 02:39 AM, Fleep Tuque wrote: >> > Hi Pete, >> > >> > When I had similar symptoms, it turned out my virus protection software >> was >> > blocking UDP traffic. Usually it seems if you get as far as "waiting for >> > region handshake", then your TCP traffic is ok but there's an issue with >> the >> > UDP traffic somewhere. >> > >> > If you have security software running, maybe try disabling it and seeing >> if >> > that changes anything, can also install a packet sniffer like Wireshark >> to >> > see what packets are coming and going in case that helps diagnose the >> issue. >> > Can also double check to make sure the proper ports are open with a 3rd >> > party.. >> > >> > Let us know if any of that helps and good luck! >> > >> > - Chris/Fleep >> > >> > >> > >> > On Sun, Aug 14, 2011 at 5:27 AM, Guardian <[email protected]> >> wrote: >> > >> >> Hi all, >> >> >> >> I'm running opensim in Robust grid mode, and I've been trying to connect >> >> outside my LAN but just arnt having any luck. >> >> >> >> I get to awaiting region handshake, then the "we're having trouble >> >> connecting" message. I know this is a fairly common issue, and here is >> what >> >> I've tried: >> >> >> >> Checking ports 8002 8001 and 9000 are forwarded to the correct server. >> >> >> >> Checked, rechecked and triplechecked regions.ini >> >> >> >> I dont think my router supports loop back so I set an entry in the hosts >> >> file on the server so the external domain name points back to the >> server. >> >> >> >> I've been at this for months, I even gave up and tried a bunch of other >> >> Sims, but none of them have the features I want. >> >> >> >> Can anyone help step through this issue? >> >> >> >> Thanks in advance, >> >> -Pete >> >> >> >> _______________________________________________ >> >> Opensim-users mailing list >> >> [email protected] >> >> https://lists.berlios.de/mailman/listinfo/opensim-users >> >> >> >> >> > >> > >> > >> > _______________________________________________ >> > Opensim-users mailing list >> > [email protected] >> > https://lists.berlios.de/mailman/listinfo/opensim-users >> _______________________________________________ >> Opensim-users mailing list >> [email protected] >> https://lists.berlios.de/mailman/listinfo/opensim-users >>
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
